Legrand Wiring Devices Catalogue 2012

91 / 244

Pack Cat. Nos. Room controllers
Ability to connect the sensor(s) and the
push button(s)
Fixed directly to the false ceiling via cable ducting
Controller/sensor output connection
(up to 10 sensors Cat. Nos. 0488 20/21/22/23/24/30,
see opposite)
by cord or RJ 45 cable or BUS/SCS cable to be
fitted with RJ 45 connector Cat. No. 0488 72
Power supply 100/240 V
Room controller 2 outputs 16 A
1 0488 50 Allows 2 lighting circuits to be controlled in
2 different phases or 1 lighting circuit and 1 A/C
circuit
Room control 1 input, 2 outputs DALI/DSI
1 0488 51 Controller for DALI and DSI dimming
Enables the window side of a room (which benefits
from natural light) and the corridor (which has less
natural light) to be dimmed separately with a single
sensor
1 sensor input, 2 inputs for auxiliaries,
2 DALI outputs and 1 fan output (volt-free contact)
For controlling light sources with sensors (with up to
5 sensors) :
- 2 x 16 DALI/DSI ballasts
Connected via screw terminals
Room control 1 input, 2 outputs 1-10 V
1 0488 52 Dimming lighting controller 1-10 V
Enables the window side of a room (which benefits
from natural light) and the corridor (which has less
natural light) to be dimmed separately with a single
sensor
1 sensor input, 2 inputs for auxiliaries and
2 lighting outputs
Connected via screw terminals
0488 50
Automatic lighting management in areas that benefit from natural light : e.g. individual and open-plan offices, meeting rooms + Management of an
additional circuit - lighting/air conditioning/ventilation etc.
Presence mode : automatic on/off switching upon detection
Absence mode : manual switching on with push button, automatic switching off
Factory pre-set : time delay 15 minutes, light level threshold 500 lux for false ceiling sensors, 300 lux for flush mounted sensors
Precise adjustment through mobile configurators
Pack Cat. Nos. RJ 45-BUS/SCS connector
Allows controller(s) and sensor(s) to be connected
directly using BUS/SCS wiring by branch connection
1 0488 72 Male connector
RJ 45 doubler
10 0488 68 Allows the number of controller inputs to be doubled
Mobile configurators
All sensors are pre-set in the factory
- lighting threshold : 500 lux in false ceiling, 300 lux
surface mounted
- time delay : 15 minutes and walkthrough function
activated
Mobile configurators allow the pre-adjusted
settings and the detection sensitivity to be
readjusted
1 0882 35 Step by step programming via pre-set buttons
1 0882 30 Digital programming to the nearest decimal place
Instant programming control
Allows the settings of each sensor to be displayed
Option of putting adjustment settings in the memory
and using them for other sensors
IR remote control - ON/OFF-dimming control
1 0882 31 Allows to manage 2 directions and general switch off
Powered by two 1. 5 V LR 03 alkaline batteries
(supplied)
For remote control of sensors Cat. Nos.
0488 05/06/07/08/09/10/13/20/21/22/23/24/25
(see opposite)
Surface mounting boxes
Used for surface mounting ceiling sensors
5 0488 74 For false ceiling sensors Cat. Nos. 0488 03 (see
p.80), 0488 07 (see p.81) and 0488 20 (see
opposite)
5 0488 75 For false ceiling sensors Cat. Nos. 0488 05/06,
0488 17 (see p.81), 0488 21/22 (see opposite) and
0488 35 (see p.99)
0488 68 0488 72 0488 23 (see opposite) 0882 30 0882 35
+
lighting management standalone sensors - 2 outputs (continued)
for areas benefitting from natural light
NEW
NEW
83
NEW