165 / 180
165
Technical
information
LexCom Performance
Trouble shooting
Recommendations and installation
Telephone Connections
For all telephone connections, you have to use a two wire line adaptor in order to
avoid any short circuit or non-functioning of other services (TV & data).
Security Input
Do not use the Security Input unless used with the stacking cord. Failure to do
so will cause permanent damage of line one.
Non-functioning telephone
If the telephone line 1 does not work, but that the telephone line 2 still works,
the line 1 could have been damaged by the RJ11 plug connected in the security
socket. If it is the case, please contact Schneider Electric Ltd.
PABX
Where a PABX is in use, you must use 1Pair telephone cord between the PABX
and line 1 or line 2. If the PABX requires more than 1Pair, it will not be compliant
with the LexCom Performance system with the potential risk of damaging the
PABX.
Noise on the telephone line 1 or line 2
If noise on the telephone line 1 or 2, check the system :
* without the ADSL filter,
* by plugging directly the telephone on the telephone line from the operator
(disconnection of the LexCom Performance).
If no noise occurs when doing these operations separately, the problem should
come from the mismatch impedance between the used telephone and the
LexCom Performance.
Poor TV picture
Adjust Gain and Tilt to improve signal
Poor/No TV signal using triple play
Ensure the correct input cable is used from wall outlet plate to triple play
Data/broadband cable
The dedicated LexCom Performance cables must be used for all data and
broadband services
Data input to LexCom Performance
Cat 5, Cat 5E, Cat 6 or dedicated LexCom Performance cables can be used as
inputs
Frequently asked questions
Answers
Can I distribute HDMI over LexCom Performance?
LexCom Performance will distribute RF television, data and telephone
What is the minimum and maximum single length I can
run LexCom Performance cable?
min. 2m, max. 50m
Can I use Cat. 5 or Cat. 6 cable?
No, bandwidth is insufficient on Cat. 5 and Cat. 6 cable
Is it possible to receive more than one signal from one
outlet?
Yes. Incorporating a Tripleplay splitter enables you to connect to TV, Data and
telephone at one LexCom Performance outlet.
Do I need to run 3 cables to each wall outlet?
One of the many advantages of LexCom Performance is that you only need to
run one cable to each LexCom Performance outlet
Can I have infra-red control over my equipment?
Yes, by using a seperate RF to IR Convertor (available seperately from retail
outlets)
Can I distribute cable or satellite broadcast?
LexCom Performance will not transmit feeds from the LNB of a satellite receiver.
To achieve the same satellite channel in multiple rooms you must use the RF
output on the receiver and connect to RF in on the LexCom Performance unit.
The LexCom Performance system will allow the use of multiple cable receivers
within the home. Restrictions to interactive services will apply as the LexCom
Performance does not accommodate for return path.
With the LexCom Performance system you can have access to a high speed
broadband networks that can provide you video, entertainment, online gaming,
plus the ability to download music and video. Other opportunities include VoIP
(Voice over IP), SOHO (small office, home office), home schooling, and many
more.