243 / 338
D-9
Additional information
The energy management
with Prisma P
Presentation
111214
+24VDC
CMD
SDOF0V
NP
OF
0VI1I2Q24V
0VI1I2Q24V
0VI1I2Q24V
0VI1I2Q24V
0VI1I2Q24V
0VI1I2Q24V
0VI1I2Q24V
0VAI1AI224V
1
2
3
4
5
6
7
8
1
2
3
4
5
6
8
+24V0V
COM
STATUS
LK/10-100/ACT
ETHERNET
NETWORK
STATUS
R
COMD1D0 0V
7
Imax:63A
iEM31
ON
C/-D1N.C.
CD0N.C.
0V
D1/+
D0/-
ETH1
ETH2
ETH1
ETH2
24VDC
POWER
POWER
Com’X200
POWER
Made inGERMANY
100-230V
~
0.6A
24V 1.2A
50/60Hz
HAZARDOFELECTRICSHOCK,
EXPLOSION,ORARCFLASH
Turnoff allpowerbeforeworkingon this equipment.
Failure to follow these instructionswill result indeath
or serious injury.
DANGER
EBX200
100-230V
Modbus
Ethernet network
ULP system
Acti 9 Smartlink Ethernet
Acti9 Smartlink Ethernet collects data from Smartlink
modbus and transfers them via the Ethernet network.
Acti 9 Smartlink Modbus
Acti9 Smartlink Modbus is used to transfer data from
Acti9 devices to a PLC or monitoring system via the
communication system: Modbus serial line.
IFE Ethernet interface module
The IFE Ethernet interface for LV circuit breaker
enables an intelligent modular unit (IMU), for
example a Masterpact NT/NW or Compact NSX
circuit breaker to be connected to an Ethernet
network. Each circuit breaker has its own IFE and a
corresponding IP address.
Com’X 200 energy server
Com’X 200 energy server is a compact, plug-and-play
data logger that merges seamlessly with the Smart
Panel energy management solution. It consolidates
inputs from analog environmental sensors (e.g.
temperature), digital readers (e.g. pulsed signals
fromsmart energy or water meters, load running
hours), and energy management equipment running
over the Modbus protocol.
Designed for ease of implementation, data can be
transmitted securely via Ethernet, Wi-Fi, or GPRS to
any energy management platforms. The Com’X 200
energy server is scalable and can be easily adaptable
to accommodate future upgrades. Com’X 200 is a
perfect fit with our energy management services,
enabling visualization, tracking, and analysis of energy
data to support optimization of energy performance
and cost management.
Module interface Modbus IFM
this module required for connection to the network,
contains the Modbus address (1 to 99) declared by
the user via the two dials in front. It automatically
adapts (baud rate, parity) to the Modbus network in
which it is installed.
It is equipped with a lock-out switch to enable or
disable operations involving writing to Micrologic, i.e.
reset, counter reset, setting modifications, device
opening and closing commands, etc.
There is a built-in test function to check the
connections of the Modbus interface module with the
Micrologic and FDM121 display unit.