43 / 148
A-27
DB117441
Protection setting functions
GetnSet can also be used to back up circuit breaker settings and restore them on the
same device or, under certain conditions, copy them to any Compact and Masterpact
circuit breakers equipped with the same type of Micrologic control unit.
This concerns only advanced settings, as other parameters must be set manually
using the dials on the Micrologic control unit.
When commissioning the installation, safeguard the configuration parameters of
b
your electrical distribution system by creating a back-up of circuit breaker settings so
that they can be restored at any time.
The settings read by GetnSet can be transferred to a PC and are compatible with
b
RSU software (Remote Setting Utility). Protection configurations can also be created
on a PC using this software, copied to GetnSet's internal memory and uploaded to a
Compact and Masterpact circuit breakers with a compatible Micrologic trip unit and
dial settings.
Operating procedure
The procedure includes several steps.
Plug GetnSet into the receptacle on the front of the Micrologic control unit of
b
a Compact and Masterpact circuit breakers.
On the keypad, select the type of data (operating data or settings) and the transfer
b
direction (download or upload). This operation can be done as many times as
required for the entire set of Compact and Masterpact circuit breakers.
Downloaded data is transferred to the GetnSet internal memory and a file is
b
created for each Compact device (either an .rsu file for settings or a.dgl file for
operating data).
Data can be transferred between GetnSet and a PC via a USB or Bluetooth
b
connection.
Operating data can be imported in an Excel spreadsheet and protection settings
b
can be read with RSU (remote setting utility) software.
Features
Battery-powered to power a Micrologic control unit even if the breaker has been
b
opened or tripped. This battery provides power for an average of 1 hour of use,
enough for more than 100 download operations.
Can be used on Compact and Masterpact circuit breakers equipped or not
b
equipped with a Modbus "device" communication module.
Portable, standalone accessory eliminating the need for a PC to connect to
b
a Compact and Masterpact circuit breakers.
No driver or software required for GetnSet connection to a PC.
b
Can be used with many circuit breakers, one after the other.
b
Embedded memory sized to hold data from more than 5000 circuit breakers.
b
Supplied with its battery, a cable for connection to Micrologic trip units, a USB
b
cable for connection to a PC and a battery charger.
Compatibility
Micrologic control units A, E, P.
b
PC with USB port or Bluetooth link and Excel software.
b
Technical characteristics
Charger power supply
100 – 240 V;
a
1 A; 50 – 60 Hz
Charger power consumption
Max 100 W
Battery
3.3 V DC; 9 mAh; Li-Ion
Operating temperature
-20 to +60 °C
GetnSet dimensions
95 x 60 x 35 mm