Hager General Catalogue 2017-18

1.66

Data is subject to errors and technical modifications.

Essential Extras & Accessories

Technical Data

Commercial

Distribution

RJ45 Connection Cable

The high quality low loss Category 5e RJ45 Connec-

tion Cable provides secondary connection between

the plug-in current transformer and meter.

CT Output and RJ45 Lead Tester

This device makes it possible to test the RJ45 patch lead used to connect the

current transformer to the meter. It also enables a standard electricians multi-

meter to measure the individual secondary outputs of the current transformer.

To test the RJ45 patch lead, simply disconnect the lead

from the meter and current transformer. Plug one end into socket

and the oth-

er end into socket

on the test box. Press the test button - the Green LED will

light to indicate the lead is OK or the Red LED will light to indicate a faulty lead.

When the lead is proven to be OK you can then check the individual second-

ary outputs of the current transformer. To measure the secondary output plug

one end of the RJ45 patch lead into the current transformer and the other end

into socket 2 on the test box. You can now use a standard multimeter to test

the secondaries using the test points on the front of the test box. The output

measured for each phase should be between 0 and 330mV a.c.

Model Reference:

JFT03

Meter Voltage Supply Cable

Our high quality Meter Voltage Supply Cables are

fitted with a plug at one end and insulated bootlace

ferrules at the other and provide power to the plug-in

meter from your mains supply.

Meter to Meter Supply Cable

Our high quality Meter to Meter Voltage Supply

Cables are fitted with a plug at one end and socket

at the other. This allows multiple plug-in meters to be

energised from a common supply. Up to 32 meters

can be powered in a ‘daisy chain’ arrangement using

this method.

Two type of cable material are available:- LSZH (Low

Smoke Zero Halogen).

3 Phase CT Splitter Box

This 3 Phase CT Splitter Box allows the separate monitoring of each phase of

a three phase current transformer on individual energy meters.

Model Reference:

JFS03

Meter

3 Phase CT Splitter Box

To Single Phase Meters

L3 L2 L1 CT