317 / 576
317
Spacial SFP
Prisma functional system
Characteristics
Form 2 partitioning
Separation of busbars from the functional units:
b
b
protection against contact with live parts upstream of the outgoing circuits
b
b
protection against penetration of foreign solid bodies.
Lateral
partitioning
Form 2 restoration for
side-barrier cut-out
Partitioning
extension
Front and
rear barrier
Inter-cubicle
partitioning
DD384407.eps
DD384408.eps
DD384409.eps
DD384410.eps
Schemes
DD383356.EPS
DD385542.eps
DD383360.EPS
DD385543.eps
Characteristics
b
b
Vertical barrier made
of insulating slats.
b
b
Can be installed on
both sides of Linergy and
flat busbars.
b
b
The space between
the slats is sufficient for
prefabricated
connections (one copper
bar, 5 or 10 mm thick, or
insulated flexible bars) or
for cables up to 35 mm²,
while maintaining the
degree of protection
IP2X compliance with
standard IEC 60695.2.1
concerning withstand to
fire.
b
b
This kit enables passage
of the connection between
a device > 1600 A (NW,
INS) and lateral vertical
busbars.
b
b
It is made up of an
insulated plate (six modules
H 300 mm) that can be cut
as required, supplied with
supports and the necessary
hardware.
b
b
For the Spacial SFP
system switchboards 600
and 800 mm depth,
a partitioning extension
is required.
b
b
Front protection is
realized by the
association of the door
W300 and this barrier.
Metallic barrier,
composed of 2 parts
H850, pre-cut at both
ends.
b
b
Rear protection, a
barrier is required at the
rear of the busbar
compartment in cubicles
that are 800, 1000 and
1300 mm deep.
b
b
Metal partition, used to
separate two adjacent
cubicles.
b
b
It is made up of two panels,
each 850 mm high.
b
b
The top and bottom ends
have knock-outs for horizontal
busbars.
b
b
Supplied with the
necessary supports and
hardware, the partition is
mounted on the framework
and does not hinder
installation of the functional
mounting plates.
Referencias 06545
04924
D600:
06541
D800:
06543
06540
D500:
06555
D600:
06565
D800:
06558
Partitioning of horizontal busbars
DD384412.eps
DD384411.eps
W300
W700
Designation
b
b
Set of two barriers (front and rear), plus a slotted rear panel for efficient natural convection in the switchboard.
b
b
The set can be used to partition horizontal busbars installed at the top or bottom of the cubicle.
b
b
The space required for the busbars is not increased.
For Depth
D500
D600
D800
D500
D600
D800
Cat. no. for 3M
busbar
06560
06561
06563
06570
06570
06570
Cat. no. for 4M
busbar
06568
06568
06568
06567
06567
06567
Note:
when the busbars are at the bottom of the cubicle, gland plates are mandatory.