25 / 164
WIRING ACCESSORIES AND SINGLE PHASE DISTRIBUTION
PG00400018U – March 2012
25
Product overview
Memera consumer units and devices
1.4
Memera moulded consumer units – quick and easy installation
Step 1 – Prepare for base installation
On removal of the main cover using the quick release cover fasteners, the
complete pan assembly can be withdrawn from the base by means of the
unique clip feature. The busbar is then removed from its retaining clip.
Step 2 – Cut-out and cable preparation
Using any of the easily removable cut out sections, the cables may be prepared.
The empty base is then fitted to the wall without obstruction to the cable bunch..
Step 4 – Internal wiring
On re-fitting of the pan assembly, the pre-prepared cables can be wired to the
devices. Circuit testing can then be carried out at the appropriate time.
Step 3 – Pan assembly preparation
MCBs and RCBOs are fitted to the pan assembly in the appropriate positions.
The busbar is then snapped to the required length (split load units only) and fixed to
the device terminals. On completion the pan assembly is clipped into position.
Step 5 – Completion of internal wiring and labelling
Once all wiring is completed, the push-fit busbar cover is slotted
into position and the internal labels can be applied.
Step 6 – External identification labels and fitting of main cover
The external circuit identification labels are now applied. The cover is
then replaced easily and quickly using the quarter turn fasteners.