Thorn - Product Catalogue - 2014/2015

504 / 578

504
SensaLite
Product details and Ordering guides
SENSA SDP
96241223
•Manual dimming/switching
•20 DALI/DSI ballasts
•4 scenes + off
•Wall mounted
(manually programmable)
Sensa SDP dimmer to control the light
level of all luminaires connected to its
DALI/DSI output.
Digitally enabled luminaires
(incorporating up to 20 DALI/DSI
ballasts in total) can be controlled by
the simple scene setting plate.
The product has the following
controls:
Scene buttons:
Four buttons that offer 4 lighting
levels. The default levels are:
1 - 100% brightness
2 - 75% brightness
3 - 50% brightness
4 - 25% brightness
These levels can easily be changed.
1 Gang plate, white.
To be mounted into UK standard
back box (not supplied) for sinking
in (min. box depth 35mm) or dry-line
plaster board walls. Input voltage
230V, 50Hz, 1 DALI/DSI output,
terminals 2x 2.5mm².
Degree of protection IP20, permitted
ambient temperature 0...+30°C.
SWITCHLITE MRE SLD
96218677
•Passive infra red detection
•Presence
•Switching (8A)
•7m coverage at 2.8m
mounting height
•3m max mounting height
•Ceiling mounted
•Manual adjustment
Presence Detector providing energy
saving (on/off switching) in response
to room occupancy and daylight
levels, controlling standard luminaires
containing wound gear or high
frequency ballasts. Suitable for indoor
use only.
To switch from more than one position
two or more units are wired in parallel.
Covers up to 7 metres diameter at
a 2.8m mounting height. Minimum
ambient light level and time delay
before switching luminaires off
(10s to 30min) adjustable.
Fits into 64mm diameter hole in
suspended ceilings. Supply voltage
230...240V, 50Hz. Switching
capacity 8A resistive, 6A capacitive
or inductive, 8 HF electronic ballasts,
or 3A with compact fluorescent lamps.
SENSALITE SLOCS
96239752
•Switching
•IP40
SENSALITE SLOCSP
96239753
•Switching with photocell
•IP40
SENSALITE SLOCSX
96239756
•Switching
•IP65
SENSALITE SLOCSPX
96239757
•Switching with photocell
•IP65
SENSALITE SLOCRPDSI
96239754
•DSI dimming
•IP40
SENSALITE SLOCRPDSIX
96239758
•DSI dimming
•IP65
SENSALITE SLOCRPDLI
96239755
•DALI dimming
•IP40
SENSALITE SLOCRPDLIX
96239759
•DALI dimming
•IP65
A comprehensive range of passive
infrared presence detectors designed
to be fitted to a batten-style luminaire
or similar luminaire equipped with
M20 knockouts. Basic switching,
switching with photocell and also
DALI/DSI dimmable versions are
available in either IP40 or IP65.
SWITCHLITE MRE SLD MAN
96239823
•Passive infra red detection
•Presence or absence
•Switching (10A)
•7m coverage at 2.8m
mounting height
•3m max mounting height
•Ceiling mounted
•Manual or programmable
adjustment
•IP55 version also available
(96239821)
The SwitchLite MRE SLD MAN
detector provides automatic control
of lighting loads with optional
manual control. It can be used
on incandescent, fluorescent and
compact fluorescent lighting, and has
the added benefit of being able to
connect an external switch. Absence
detection. To switch from more than
one position two or more units are
wired in parallel. Covers up to 7
metres diameter at a 2.8m mounting
height. Minimum ambient light level
and time delay before switching
luminaires off (10s to 30min)
adjustable.
Fits into 64mm diameter hole in
suspended ceilings. Supply voltage
230...240V, 50Hz. Switching
capacity 10A.
For detailed programming see also
SWITCHLITE IR LCD PROGRAMMER
962414