217 / 338
C-19
Enclosures
Installation accessories
Mounting
Lifting rings
Framework stabiliser kit
Dd381541.eps
DD383846.eps
Cat. no.
08700
08701
Characteristics
bb
Set of four lifting rings screwed to the framework.
bb
Use a set of lifting rings for each framework (W = 650 and
800 mm) containing devices.
bb
When two cubicles with devices have been combined, use a
lifting beam.
bb
can be installed and removed without removing the roof
bb
even if they are left attached, the switchboard conserves its
original degree of protection.
bb
Made up of four blocks under the framework
bb
Suitable for all types of cubicles, whatever the width and depth
bb
Increases the stability of the cubicle during mounting of devices
bb
Makes possible cubicle handling using a pallet mover or a forklift
bb
Protects the front, side and rear cover panels during handling
bb
Can be reused.
Dd381542.eps
Dd381543.eps
Positions of the lifting rings for two combined cubicles containing
devices.
In this case, a liftingbeam must be used.
Mounting
Levelling kit
False floor fixing kit
Floor/wall fixing kit
Dd381549.eps
Dd381547.eps
Dd381548.eps
Dd381550.eps
Dd381553.eps
Cat. no.
08702
08703
08704
Characteristics
bb
Set of 4 fixtures
bb
can be installed at any time, even when
the cubicle is already in position
bb
maximum adjustment range = 10 mm
bb
secures the cubicle to the floor.
bb
Made up of four independent clamps
bb
clamp on:
vv
“U” sections: H = 175 mm, W = 70 mm
vv
“I” sections: H = 120 mm, W = 64 mm
bb
clamp travel = 11 mm.
bb
Made up of two brackets and four clamps
bb
can be used to offset the switchboard
fixing points for easier access
bb
the wall brackets ensure sufficient wall
clearance (at least 30 mm) for natural
convection.
Dd381551.eps
Dd381552.eps
Dd381554.eps
Recommended positions of the fixtures for
combined cubicles.