216 / 338
C-18
Cubicles
Cubicle handling and rolling base, Lifting
reinforcement kit for combined cubicles,
Right-angle kit
Enclosures
Mounting
Cubicle handling and rolling base
08716
08705
DD380652.eps
L
50
DD383845.eps
Dimensions (mm)
D = 400
D = 600
L1200 to L1900 L2000 to L2550 L2650 to L3050
2 cubicle handling base end-pieces
08714
08716
-
-
-
Cubicle handling
-
-
08705
08706
08707
Characteristics
This type of base is designed to avoid any risk of cubicle deformation during transport and handling.
Five different catalogue numbers offer 27 width possibilities (1200 to 3050 mm) for 400 and 600 mm deep cubicles.
bb
Two catalogue numbers each include 2 end-pieces for handling bases for 400 and 600 mm deep cubicles respectively and
the corresponding mounting hardware.
bb
Three catalogue numbers each include 2 lengths for the sides of handling bases for 1200 to 3050 mm wide cubicles
respectively and the corresponding mounting hardware.
Handling bases can be used for both side-by-side and back-to-back cubicle combinations.
In this case, the mounting hardware for one of the sets is used.
Mounting
Lifting reinforcement kit
DD383838.eps
08722
08722
08722
300
650 400
800
800
800
DD383839.eps
Dimensions (mm)
D = 400, D = 600
Lifting reinforcement kit
08722
Characteristics
Kit 08722 is recommended for lifting combined cubicles and can be used together with handling base end-pieces 08714 or
08716 for severe transport or handling conditions.
Catalogue number 08722 includes 3 reinforcement brackets for 400 or 600 mm deep cubicles and the corresponding
mounting hardware.
Mounting
Right-angle kit IP30
DD385532.eps
Right-angle kit IP30 Linergy LGYE
08712
Characteristics
Metal duct with busbar supports
Used to create and protect the connection of horizontal busbars between two cubicles installed at right angles.
This kit needs a Linergy LGYE busbar of 1080 mm length.
Order the additional joint kit, comprising the 4 copper connections and mounting hardware:
bb
2 x 04610 for Linergy LGYE 630-1600 A
bb
2 x 04611 for Linergy LGYE 2000-2500 A
bb
2 x 04613 for Linergy LGYE 3200-4000 A
Dd381336.eps
Dd381337.eps
Right-angle kit IP30 Linergy BS
08713
Characteristics
Metal duct
Used to create and protect the connection of horizontal busbars between two cubicles installed at right angles.
Order:
bb
fixed support 2 x 04664 (if 100 x 10 bar, add 2 x 04671)
bb
free support 2 x 04662 (if 100 x 10 bar, add 2 x 04671)
bb
joints :
vv
04640 (bars H 50/60) order 2 per phase
vv
04641 (bars H 80/100) order 2 per phase.
(1)
For further details, please contact Schneider Electric.
New !
Available
in late 2014
(1)