117 / 210
PrismaGenclosures
Prisma G W600, W300
IP30, IP31, IP43
Installation / liftingaccessories
Lifting accessories
The lifting rings are used to move a single wall-mounted or floor-standing enclosure.
For combined enclosures, use the lifting/reinforcement cross-members (see below).
2 lifting rings for single
wall-mounted or floor
standing enclosures
Lifting/reinforcement cross-members
for combined enclosures
DD384010.eps
DD381653.eps
Catalogue numbers
08801
08812 08811
08811
08813
08814
08826
Characteristics
Set of two lifting rings
Have 2 types of holes: for lifting and for mounting on a wall
Installation possibilities
Switchboards can be mounted on a wall in three manners: with the hook-on rail
system, via the inside of the enclosure or using external wall-mounted brackets.
Combined enclosures can be mounted using the lifting/reinforcement cross-
members set of two lifting/reinforcement cross-members.
Hook-on rail system
Mounting via the inside
Mounting using the external
wall-mounted brackets
DD385226.eps
DD384038.eps
DD384037.eps
Catalogue numbers Delivered with the enclosure
-
08804
Characteristics
The enclosure comes with 2 cross-members
secured to the back of the enclosure (top
and bottom) and a support rail (with levelling
adjustment) for screw-mounting on the wall.
The enclosure is easily mounted on the
hook-on rail system.
End the fixation with 2x 8mm diameter
screws, at the bottom of enclosure
The enclosure can be mounted through the
spacers in the 4 holes provided on the enclosure
using 8 mm diameter screws (2 knockouts can be
removed if necessary to provide 2 other holes).
4 external wall-mounted brackets.
117
Plinth raiser
For floor-standing enclosure
Dd380633.eps
Catalogue numbers
08805
08807
Characteristics
For basic floor-standing enclosure or
extension W = 600 mm
For a duct
W = 300 mm
Flush-mounting kit
For wall-mounted enclosure
Dd381256.eps
Catalogue numbers
08819
08820
Characteristics
6 to 18 modules
21 to 27 modules