312 / 408
10
Kaedra
Accessories
Description
For enclosure installation
n
Association kit: used for horizontal or vertical association of two enclosures with
one another while preserving IP65
n
Wall mounting lugs: used to fix the enclosure to the wall without using holes in
the back of the enclosure
n
Row separator: used to create IP2 insulated zones. For example: separate strong
and weak current zones
n
Jack-up block: used to detach the enclosure from the wall in order to route
cables behind the enclosure (2 lengths of 1 metre to be cut)
n
Plain front plate: used to hide a zone without modular switchgear
n
Blanking plate: clipped onto the front plates to conceal slots with no devices
n
Junction for trunking: allows tidy incoming of cables in a trunking
For switchgear installation
n
Functional plates for 90 x 100 mm slot:
Adaptation (screwed on) for 65 x 85 mm power outlets
Blanking or adaptation (screwed on) for 65 x 65 mm or 75 x 75 mm power
outlets (slot to be punched out)
Blanking or adaptation (clipped on) for buttons, indicator lights and switches of
diameters 16 and 22 mm (1 central slot or 2 side by side to punch out).
Blanking for identification (clipped on)
n
Functional plates for 103 x 225 mm slot:
Adaptation (screwed on) with 2 openings: 65 x 85 mm and 90 x 100 mm.
Blanking or adaptation (screwed on) offering 1 slot for 65 x 65 mm or
75 x 75 mm power outlets (to be punched out) and a universal zone
Adaptation (screwed in) for 63 A 100 x 107 mm LV power outlet
n
Interface kit for 90 x 100 mm slot for:
INS40 to 80 A (chassis + plate)
Modular switchgear up to 4 modules
e.g. residual current circuit breaker (chassis + plate + membrane)
n
Slotted plate (150 x 250 mm): screwed onto the back of the enclosure, used to
fix non-modular devices
For electrical connection
n
Terminal block support: flat iron (12 x 2 mm), 2 versions: screwed onto the pins
or onto the chassis
n
Set of insulated terminal blocks with IP42 covers:
4 holes: clipped onto the terminal block supports, fixed onto walls by dovetails,
8 holes: clipped onto the terminal block supports, clipped onto DIN symmetrical
rail, screwed onto the back
32 holes: clipped onto the terminal block supports
n
Wiring strap: used to guide cables along walls for simplified cabling (set of 5)
n
Cable support sleeves: used for incoming flexible cables
n
Cable glands: used for cable and tube incoming, guaranteeing tightness and
mechanical withstand
For identification
n
Self-adhesive symbol: allows identification of feeders by symbols:
Currents: loads (power outlet, lighting, convector, etc.), places (bedroom,
bathroom, etc.)
Special: loads (surge arrester, gate, swimming pool, etc.), places (technical
room, computer room, etc.)
n
Self-adhesive sheets for SISmarker printing: allows printing of customised labels
using the SISmarker software
For enclosure protection
n
Sealing kit: used to seal the front face on the back (2 screws) and the front
plates on the front face (4 kits)
n
Keylock: Eurolocks combination no. 850. Installed in the door
n
Insert (male square or triangle, female key supplied): installed in the door
For enclosure maintenance
n
Front plate
n
Chassis 1 row: can be combined to obtain a multi row chassis
Terminal block composition
Number of
holes
Total
Width
in mm
Cross section in mm
2
10
16
4
2
2
85
8
4
4
85
32
16
16
202
10/32
Technical
Section 11
Dimensions
Section 12