51 / 576
51
PB500199-30
Spacial S3D
Steel wall-mounting enclosures
Characteristics
Characteristics
Spacial S3D
Three steel enclosure definitions are available:
b
b
Enclosure with plain door.
b
b
Enclosure with plain door delivered with a galvanised plain mounting plate, not installed.
b
b
Enclosure with glazed door, 4-mm-thick Securit
®
glass.
Personnel protection
b
b
Earth connection: Spacial S3D steel enclosures are equipped with M6 x 16 earth studs
welded in the body and the door for equipotential connection. Earth braid to be ordered
separately (see page 301).
b
b
Closing the enclosure: the enclosures are equipped from the height of 600 mm with three
locking points with linkage, with a single control point, preventing the enclosures from being
left ajar. Locks and inserts, page 66.
Material
Steel
Finish
Structured finish, epoxy-polyester powder
Colour
RAL 7035 grey
Ingress protection rating
b
b
IP66 for the single-door enclosures and IP55 for the double-door enclosures, according
to IEC 60529
Mechanical protection rating
b
b
IK10 for the plain-door enclosures, according to IEC 62262
b
b
IK08 for the glazed-door enclosures
Standards
Compliance with enclosure standards IEC 62208
The Spacial S3D wall-mounting enclosures are compliant with the RoHS directive
Certifications
b
b
UL, CUL, BV, DNV, GL, ATEX (modified enclosure)
b
b
NEMA type 4, 4X for the single-door enclosures and Nema type 12, 12K, 13 for the
double-door enclosures according to NEMA 250 standard. Information on NEMA & UL
classification on pages 536 and 537
Nuclear decontamination: RAL 7035 and AFNOR A550 tests available on demand.
More information on coating properties on pages 538 and 539
Installation
Outdoor installation: compliant with IEC 62208 regarding type tests specified in §9.12
(resistance to ultra-violet (UV) radiation) and §9.13 (resistance to corrosion)
It is always advisable to install a canopy to avoid water stagnation on the upper part
of the enclosure
Fixing
4 (or 6**) M8 x 25 shouldered backstuds for installing mounting plates and step slides,
leaving a space of 10 mm behind them.
Supply
Body
b
b
Single-piece body (cross-shaped structure). Gutter-shaped front profile with double fold.
Flat rear
b
b
M6 x 16 earthing screws for equipotential connection between the door and the body
of the enclosure
b
b
Cable-gland plate with marking for easy drilling and to guarantee the maximum access
surface; delivered with the enclosure. This plate is flush with the body of the enclosure
(detail and other options on page 70)
b
b
Direct wall-mounting (4 Ø 10 holes for the sealing plugs guaranteeing the IP) or with the help
of fixing lugs installed from the outside (to be ordered separately, see page 60)
Door
b
b
Wall-mounting enclosure supplied with 3-mm double-bar lock as standard
b
b
Polyurethane door gasket
b
b
M6 x 16 earthing screws for equipotential connection between the door and the body of the
enclosure
b
b
Easily removable and reversible, with 20-mm return with double thickness granting excellent
rigidity, opening to 120°, equipped with 2 or 3 invisible hinges*
b
b
Door opening to 180° with optional hinges (page 68)
b
b
For heights from 600 mm, three locking points with linkage, with a single control point.
Simple reversal of linkage. Maximum load: 50 kg/m
2
b
b
A handle is delivered which provides 2 functions:
v
v
Operating key
v
v
Tool for loosening the stud protection caps. This handle can be solidly attached to the locking
system by means of a captive element
b
b
Perforated rails on the door, with drill holes with a diameter of 4.2 mm in steps of 25 mm:
v
v
2 vertical rails from the height of 400 mm
v
v
2 vertical rails and 2 horizontal rails from the width of 800 mm
* From the height of 800 mm.
** 6 studs for widths 1000 and 1200 (see pages 74 and 75).