202 / 320
Data is subject to errors and technical modifications.
3.3
Lighting, Connection
& Control
Klik 4 Pin
Marshalling Boxes, Occupancy Sensors, Plug-in Ceiling Roses
Marshalling Boxes
Occupancy Sensors
3 Pin Plug-in Ceiling Rose & Cover
Characteristics:
-
-
Klik marshalling boxes are used in conjunction with Klik 3 and 4 pin plugs to connect luminaires within an area. The Klik
marshalling box can be separated into two independently switched circuits. These circuits can be controlled via wall switch
or occupancy sensor.
-
-
Complies with BS 5733:2010.
-
-
Main terminal rating: 16 Amps.
-
-
Socket outlet rating: 6 Amps.
-
-
Separate terminals for flexible conductors, rating: 10 Amps.
-
-
Short circuit tested 1500A conditional rating.
-
-
Socket outlets accept either Klik lighting (3 pin) plugs, Klik auxiliary (4 pin) plugs.
Characteristics:
-
-
Comes complete with integral photocell and the facility for wall switch override.
-
-
Can be programmed for absence or presence.
-
-
Range 7m diameter for large movements, 5m diameter for small movements.
-
-
Factory presets, lux = 400, time = 20 min, presence detection.
-
-
EEK001
programming tool is easy to use with 2 memory settings to enable repeatability.
-
-
EEK002
remote control comes with a wall mounting bracket for storage and allows room occupant to have control of
lighting output.
-
-
EE883
The detection range diameter is adjustable from 1 to 8 metres. The hyper frequency sensor allows for detection of
movement through partitions (drywall, wood, glass) independent of temperature detection. 360° Detection area. IP54 rated.
230V AC. Complies with EN 60669-1, EN 60669-2-1, EN 301489-1, EN 301489-3, EN 300440-1, EN 300440-2.
-
-
EE880
Infra-red corridor motion detector for surface mounting. 230V AC. IP54 rated. Detection zone of 4m x 20m. Overrun
timer from 5 seconds to 15 minutes. Complies with EN 60669-1 & EN 60669-2-1.
-
-
EE810
- one channel detector. Provides direct control of a light load or can be used as a slave with
EE811
for enlargement
of detection area. Lux level and ON delay (duration or pulse) defined via potentiometers. Test mode in order to set lux level
and the detection pattern.
-
-
EE811
- two channels detector
.
Lux level and ON delay adjustable via potentiometers. Input for slave (
EE810
) and/or remote
push button. 230V wall switch override. Complies with EN 60669-1 & EN 60669-2-1.
Characteristics:
-
-
The 6A plug-in ceiling rose is used to offer a pluggable connection for luminaires. The luminaire can be connected and
disconnected under load.
-
-
Complies with BS 5733:2010.
-
-
Sockets have 4 terminations: line, neutral, CPC and loop-in.
-
-
Plugs have 3 terminations: line, neutral and CPC.
-
-
Fixing: 50.8mm Standard Diagonal (BESA).
Description
Cat ref.
4 Way Klik Lighting Distribution Unit
KLDS4
6 Way Klik Lighting Distribution Unit
KLDS6
8 Way Klik Lighting Distribution Unit
KLDS8
10 Way Klik Lighting Distribution Unit
KLDS10
12 Way Klik Lighting Distribution Unit
KLDS12
Description
Cat ref.
Standard Occupancy Sensor, Pre-Wired 3m
EEK513W
Standard Occupancy Sensor (without cable)
EEK510B
Surface Mount Kit
EEK005
Programming Tool
EEK001
Remote Control
EEK002
360º Hyper Frequency Sensor
EE883
PIR Corridor Motion Detector
EE880
Presence Detector 1 Channel
EE810
Presence Detector 2 Channel
EE811
Surface Mounting Box for
EE810
and
EE811
EE813
Description
Quantity
Cat ref.
3 Pin Plug-in Ceiling Rose White
10
PCR2000
KLDS4
EEK510B
EEK001
EEK002
KLDS12
PCR2000
EE883