207 / 320
Data is subject to errors and technical modifications.
3.8
Lighting, Connection
& Control
Klik 7 Pin
Occupancy Sensors
Standard & Digital Occupancy Sensors - Continued
KNX Occupancy Sensors
Characteristics:
-
-
EE883
The detection range diameter is adjustable from one to eight metres. The hyper frequency sensor allows for detection
of movement through partitions (drywall, wood, glass) independent of temperature detection. 360° Detection area. IP54
rated. 230V AC. Complies with EN 60669-1, EN 60669-2-1, EN 301489-1, EN 301489-3, EN 300440-1, EN 300440-2.
-
-
EE880
Infra-red corridor motion detector for surface mounting. 230V AC. IP54 rated. Detection zone of 4m x 20m. Overrun
timer from 5 seconds to 15 minutes.Complies with EN 60669-1 & EN 60669-2-1.
-
-
EE810
- one channel detector. Provides direct control of a light load or can be used as a slave with
EE811
for enlargement
of detection area. Lux level and ON delay (duration or pulse) defined via potentiometers. Test mode in order to set lux level
and the detection pattern.
-
-
EE811
- two channels detector
.
Lux level and ON delay adjustable via potentiometers. Input for slave (
EE810
) and/or remote
push button. 230V wall switch override. Complies with EN 60669-1 & EN 60669-2-1.
Note:
These devices need to be wired and can only be used with ‘wire in’ type boxes.
Characteristics:
-
-
Hager occupancy sensors come complete with integral photocell and the facility for wall switch override.
-
-
Can be programmed for absence or presence.
-
-
Range 7m: diameter for large movements, 5m diameter for small movements.
-
-
Factory presets, lux = 400, time = 20 min, presence detection.
-
-
EEK001
programming tool is easy to use with two memory settings to enable repeatability.
-
-
EEK002
remote control comes with a wall mounting bracket for storage and allows room occupant to have control of
lighting output.
Description
Cat ref.
360º Hyper Frequency Sensor
EE883
PIR Corridor Motion Detector
EE880
Presence Detector 1 Channel
EE810
Presence Detector 2 Channel
EE811
Surface Mounting Box for
EE810
and
EE811
EE813
Description
Cat ref.
KNX Relay Sensor with 3m Lead and Plug - LSZH
TKK513PE
KNX Relay Sensor with 5m Lead and Plug - LSZH
TKK515PE
KNX Digital Sensor with 3m Lead and Plug - LSZH
TKK523PE
KNX Digital Sensor with 5m Lead and Plug - LSZH
TKK525PE
KNX Occupancy Sensor (KNX only, without cable)
TCC510S
Programming Tool
EEK001
Remote Control
EEK002
Surface Mount Kit
EEK005
TKK513P
EE883