Lamps & Lighting Electronics Catalogue 2014

222 / 272

>
Dynalite Sensors
Sophisticated yet simple energy-e cient
lighting solutions
The Philips Dynalite sensor range combines
motion detection, light level detection and IR
receive in one unit. Each of these features
can be operated at the same time, allowing
automation scenarios such as turning on
the lights after detecting motion and then
dimming the lighting level once the available
sunlight has been measured, thereby providing
additional energy savings. By combining
each of these functions into one device,
operational e ciency is improved.
Each sensor has an in-built microprocessor,
allowing logical functions to control one small
room, the floor of a building, or an entire
building. All sensors receive their power
from the DyNet network, and as they are
fully remotely programmable, they can be
configured to automate and control a virtually
unlimited number of controlled outputs.
Product Benefits
Reduces the need for many di erent types of
sensors, thereby preventing ceiling clutter
Combines motion detection, light level
detection and IR receive in one unit, thus
improving e ciency
Product Features
Sensors are fully remotely programmable
Built-in microprocessor
Application
Depends on the lighting system in which the
controls are used
Type Ordering number 8710163...
DUS 704C 1 50722400
DTS 900 1 50736100
Dynalite Time clocks
Sophisticated yet simple energy-e cient
lighting solutions
Philips Dynalite timer clocks are true astro-
nomical 365-day clocks with sunrise/sunset
tracking, automatic daylight saving adjustment,
and powerful macro and conditional logic
functions. The timer clock interfaces with
other devices over the DyNet RS485
network to automate tasks and trigger
time-based events. It may be used as an
energy management controller or simply to
select scenes at preset times of the day or
week.
The timer clock is powerful enough to
provide full automation of a large commercial
project and can be programmed with events
that automatically run at a specified time. A
typical application would entail automatically
adjusting lighting levels throughout the
day, using long fade time to ensure a
disruption-free and smooth work cycle. If
required, a local button press on a panel can
override the pre-programmed events until the
next timed event occurs.
Product Benefits
Can be used for energy management and to
select scenes at preset times of the day or
week
Can provide full automation of a large project
Product Features
Pre-programmed events can be overwritten
with local button press
Can be used to set the operating mode
of other devices in energy management
applications
Sunset/sunrise tracking and automatic
daylight savings adjustment
Can interface with other devices over DyNet
RS485 network
Application
Depends on the lighting system in which the
controls are used
Type Ordering number 8710163...
DDTC 001 1 50740800
DTCE 602 1 50742200
Philips Lamps and Lighting Electronic Catalogue 2014 222
12