173 / 204
173
Technical
information
ULTI
Freelocate
Product
FreeLocate
FreeLocate
2-Setting Switch
6-Setting Switch
Memory
2 scenes/
2 devices
settings
5 scenes/
5 devices
settings, All Off.
Battery Type
CR2032 button cell battery
Operating Temperature
0 °C to 40 °C
Operating Humidity
0% to 95%
Radio Frequency
434MHz
Operating Range
100m (Open environment)*
Dimensions (H) x (W) x (D)
85mm x 85mm x 13mm
* The performance of the operating range is subject to the actual conditions of the environment, such as weather and installation conditions.
Under normal circumstances a longer range can be achieved outdoors, since indoors obstacles like concrete walls and metal shelves may
shorten the operating range.
Hand held remote
Spec/product
Remote controller
Memory
5 scenes/5 devices settings,
Master Dim Up/Down and All-Off
Battery Type
2 x AAA batteries
Operating Temperature
0 °C to + 40 °C
Operating Humidity
0% to 95%
Radio Frequency
434MHz
Operating Range
100m (Open environment)*
Dimensions (H) x (W) x (D)
125mm x 51mm x 25mm
* The performance of the operating range is subject to the actual conditions of the environment, such as weather and installation conditions.
Under normal circumstances a longer range can be achieved outdoors, since indoors obstacles like concrete walls and metal shelves may
shorten the operating range.
Function comparison table
FreeLocate 2-
FreeLocate 6-
Remote control
Scene Programming
U
U
U
Device Programming
U
U
U
Disabling Programmed Scene Setting*
U
U
-
Enabling Programmed Scene/Device*
U
U
-
Disabling All-Off Command
-
U
U
Enabling All-Off Command*
U
U
U
Scene/Device Mode Selection (Single Function)
U
U
U
Scene/Device Mode Selection (Multiple Function)*
U
U
U
Changing All-Off Function to Scene Function*
-
U
-
Resume All-Off Function*
-
U
-
Switch/Dimmer Partial Memory Clear
U
U
U
* Only applicable to the Switches and Dimmers of Product No. Starting with U20.
Environment and installation considerations
As the system uses radio frequencies, performance is dependant on the installation. Reliable operation in the following environments can be
achieved although the effective range will be reduced by:
Installation in metal frame buildings or extensions
Operation through solid or cavity stone, brick or block walls
Operation through more than one floor, ceiling or partition wall
Locations near radio or television transmitters
Damp atmospheres e.g. swimming pools or saunas
If erratic operation is experienced moving closer to the receivers can usually be expected to restore correct operation.