171 / 210
PrismaGPack 250Aenclosures
IP30
Installation / liftingaccessories
Accessories to increase the
degreeof protection IP
Installation possibilities
Switchboards can be mounted on a wall in three manners: with the hook-on rail
system, via the inside of the enclosure or using external wall-mounted brackets.
Combined enclosures can be mounted using the lifting/reinforcement crossmembers
set of two lifting/reinforcement cross-members.
Hook-on rail system
Mounting via the inside
Mounting using the external
wall-mounted brackets
DD385226.eps
DD384038.eps
DD384037.eps
Catalogue numbers Delivered with the enclosure
-
08804
Characteristics
The enclosure comes with 2 cross-members
secured to the back of the enclosure (top
and bottom) and a support rail (with levelling
adjustment) for screw-mounting on the wall.
The enclosure is easily mounted on the
hook-on rail system.
End the fixation with 2x 8mm diameter
screws, at the bottom of enclosure
The enclosure can be mounted through
the spacers in the 4 holes provided on the
enclosure using 8 mm diameter screws (2
knockouts can be removed if necessary to
provide 2 other holes).
4 external wall-mounted brackets.
Lifting accessories
The lifting rings are used to move a single wall-mounted or floor-standing enclosure.
For combined enclosures, use the lifting/reinforcement cross-members (see below).
2 lifting rings for single
wall-mounted or floor-
standing enclosures
Lifting/reinforcement
cross-members
for combined enclosures
DD384010.eps
DD385325.EPS
Catalogue numbers
08801
08812
Characteristics
Set of two lifting rings
Have 2 types of holes: for lifting and
for mounting on a wall
Accessories to increase the degree of protection IP
Canopy to increase the IP value from IP30 to IP31 Gasket for the door to increase the IP value from
IP31 to IP43
Dd381257.eps
Dd381268.eps
Used with
1 wall-mounted enclosure
1 wall-mounted enclosure
+ 1 duct
(1)
Enclosures or a duct from 6 to 33 modules
Catalogue numbers
08830
08832
08841
Designation
The addition of a canopy over a wall-mounted or floor-standing
enclosure equipped with a door ensures compliance with the degree
of protection IP31.
When the switchboard is equipped with a canopy, a gasket for the
doors ensures compliance with the degree of protection IP43.
L = 5.3 m
(1)
Whatever the duct position.
Plinth raiser
Plinth raiser
Dd380633.eps
Catalogue numbers
08805
08807
Characteristics
For basic
floor-standing
enclosure
or extension
W = 600 mm
For a duct
W = 300 mm
171