39 / 576
39
PB502069-40
PB502070-35
PB502071-35
Spacial SBM
Steel industrial boxes
Characteristics
Spacial SBM
Flat box
Spacial SBMC
FL21 Entry box
Spacial SBMB
Bus box
Box with plain faces.
Equipped with two or more FL21 cable
gland plates.
Equipped with FL 21 cable gland plates,
a hinged cover with a transparent
polycarbonate window and a DIN rail.
Box body
Single-piece body (rectangular structure). Front design incorporating folded gutters. Flat rear.
2 (or 3*) drilled profiles for installing mounting plates and DIN rails, with fixing centres of 12.5 mm.
2 or more FL21 cable gland plates (1) for easy drilling and to guarantee the maximum access area, delivered with the enclosure.
Box cover
Equipped with 2, 3, 4 or 6 half-turn thread screws, according to the version (2) to ensure maximum watertightness.
Bus boxes equipped with cover hinges for a comfortable 180° door opening.
Polyurethane sealing gasket.
Protection of personnel
Earth connection mandatory for all boxes: Spacial SBM steel boxes are equipped with a M6 x 16 earth stud welded in the cover,
to be linked with the body for equipotential connection. Earth braid to be ordered separately (Ø 6.4 mm terminal).
Material
Sheet steel
Finish
Structured
Colour
RAL 7035 grey
Ingress protection rating IP66
IP55
Mechanical protection
rating
IK10
IK08
Standard
Compliance with enclosure standard IEC 62208 and the RoHS directive
Certifications
b
b
UL, BV, DNV, LR, GL
b
b
Nema type 4, 4X according to UL 508A
standard
b
b
Fire class: M0
b
b
UL, BV, DNV, LR, GL
b
b
Nema type 12, 12K according to UL 508A standard
b
b
Fire class: M0
Installation
Indoor installation
Direct wall-mounting (4 x Ø 10 mm holes with sealing plugs to maintain the IP rating) or with the help of fixing lugs installed from
the outside (to be ordered separately, see the specific accessory pages).
Distance between fixing holes enables the installation of the box in the same locations as many existing enclosures.
Marks on the rear of the box locate the fixing points of obsolete Schneider Electric models.
Marks on the sides help with drilling the body to install hinges
Outdoor installation
Compliant with IEC 62208 regarding type tests specified in §9.12 (resistance to ultra-violet (UV) radiation) and §9.13 (resistance
to corrosion). It is always advisable to place the box under shelter to avoid water stagnation on the upper part of the enclosure
Maximum load
Loading capacity on the body: 50 kg/m²
Other characteristics
Vibration constraints
Specific construction of the Spacial SBM - Single-piece body (rectangular structure). The rear is flat without added parts - this ensures
compliance with certain vibration constraints. The tests were conducted according to the marine application by "Det Norske Veritas".
Boxes labelled "DNV" have undergone these tests and obtained classification "A"
* 3 profiles for width 800 mm.
(1) Only on Entry boxes and Bus boxes.
(2) 2 for Bus box (3 screws for width greater than 400 mm), 4 for Flat and Entry boxes (6 screws for width greater than 400 mm).
New