207 / 576
207
PB500078-99
ThalassaPLD
Polyester DIN floor-standing
enclosure
Characteristics
Characteristics
Thalassa PLD
b
b
Floor-standing enclosure with built-in canopy, not overhanging, allowing the coupling of
enclosures side-to-side or back-to-back.
b
b
Easily removable inner hinges, allowing the door to be reversed and to open to more than
180°.
b
b
Doors equipped with impressions allowing the integration of inserts for M6 screws.
b
b
Closing by handle with lever and 1242 E cylindrical safety lock. Other locks optionally
available (see page 210).
b
b
2-door floor-standing enclosure with central upright:
v
v
fixed to the enclosure and removable: one lock on each door,
v
v
fixed to the left door: a single lock on the right door.
b
b
M8 boss for installation on the lateral surfaces, inserts
ref.
NSYTEX8
not supplied.
b
b
M6 bosses in the roof for fixing the lighting or auxiliary equipment, inserts ref.
NSYTEX6
not
supplied.
Material
Polyester reinforced with fibreglass
Colour
RAL 7032 grey*
Ingress protection rating
IP43 according to IEC 60529 (IP54 with sealing kit, see page 210)
Mechanical protection rating
IK10
Installation
b
b
Outdoor installation: compliant with IEC 62208 regarding type tests specified in §9.12
(resistance to ultra-violet (UV) radiation) and §9.13 (resistance to corrosion). It is always
advisable to install a canopy to avoid water stagnation on the upper part of the enclosure
b
b
Direct fixing to the floor or on a plinth, with a height of 900 mm, partially embedded
b
b
Fixing points at the rear of the enclosure with:
v
v
M10 inserts: for installing, direct or on insulators, distribution bars for DIN-type three-pole
fuse-holder strips and for a neutral bar
v
v
M6 inserts: for installing a mounting plate
Height (mm)
Width (B) (mm)
Depth (mm)
Size DIN
No. of doors No. of locks References
850
465
320
00
1
1
NSYPLD8500
850
590
320
0
1
1
NSYPLD860
850
785
320
1
1
1
NSYPLD881
850
1115
320
2
2
1
NSYPLD8122
850
1115
320
2
2
2
NSYPLD8122C
* RAL 7035 from 2016.