177 / 576
177
PB501343-44
PB500162-17
PB500191-25
NSYTEX8PLM NSYTEX6 NSYTEX5
PB500164-28
ThalassaPLM
Insulating wall-mounting
enclosures
Specific accessories
Characteristics Fixing inserts
Ventilation
louvres*
Water drain
plug
Renovation and anti-graffiti paint
Expanding inserts for addition to the M6
bosses of the enclosure, the M5 or M6
bosses of the door and the M8 bosses of the
external rear part of the enclosure.
They can be
positioned inside
the wall-mounting
enclosures with
heights of 430 to
846 mm, allowing
ventilation through
the channels of
the enclosure.
For drainage of
condensation
water.
It is placed in
the Ø 8.5 mm**
housing at the
bottom of the
enclosure.
Paint kit with 2 components
(base 80 % + hardener 20 %),
specially designed for polyester
enclosures, for their renovation
and/or as prevention to allow
easy removal of graffiti.
Solvent for
diluting the
paint and
cleaning the
utensils.
Colour
-
-
-
RAL 7032 grey
-
Ingress protection rating -
The IP on the rear
of the enclosures
is IP44
IP53 (IEC 60529
cat. 2)
-
-
Supply
References by unit. Order by multiples
of 8 units (8, 16, 24, etc.). M5 and M6 inserts
to be ordered in multiples of 20
References by
unit. Order by
multiples of 2 units
(2, 4, 6, etc.)
References by
unit. Order by
multiples of
10 units (10, 20,
30, etc.)
The 1 kg
reference
includes 1 pot
with 800 g of
base paint
and 200 g of
hardener
(It is enough to
paint a surface
of around 5 m
2
)
The 5 kg
reference
includes 1 pot
with 4 kg of
base paint
and 1 kg of
hardener
(It is enough to
paint a surface
of around
25 m
2
)
500 g
Insert
size
For wall-mounting
enclosure
References Reference
Reference
References
M5 NSYPLM43G and
NSYPLM54G
NSYTEX5 NSYCAG35LP NSYVEA9
NSYAUPG1 NSYAUPG5 NSYAUPGS
M6 NSYPLM64G and
NSYPLM108G
NSYTEX6
M8 For the rear of
the enclosure
NSYTEX8PLM
* Ventilation louvres, airing devices with filters, fans and thermal adjustment accessories, see ClimaSys section.
** 8.2 mm for wall-mounting enclosures NSYPLM32, NSYPLM32T, NSYPLM32P and NSYPLM32B.
Diverse