19 / 164
WIRING ACCESSORIES AND SINGLE PHASE DISTRIBUTION
PG00400018U – March 2012
19
Product overview
LSC plug-in lighting system
1.3
LSC plug-in lighting system
The BS 7001 LSC (Luminaire Supporting Coupler) system is recognised as the
industry standard interface, offering complete changeability with other manufacturers’
products. To meet the increasing industry demand for LSF cable, Eaton now
offers both 3 and 4 pin versions with low smoke and fume cable.
Both versions provide considerable benefits for the specifier, contractor and end user. Litelink
represents a significant advance in the safety and ease of installation of lighting points.
A range for all Commercial, Industrial and Domestic projects
•
Designed for ease of installation
•
Cable available in 1, 2 and 3m lengths with HR (Heat Resitant)
•
and LSF (Low Smoke and Fume) options
Pre-flexed 3 and 4 pin products with either 0.75mm
•
2
or 1.00mm
2
cable
High quality, reliable, safe range of products
•
3 pin system
This version has a wide range of applications in many commercial and industrial
environments. Its technical and design features are supplemented with a full range of
plug, outlets, assemblies, pendants and mounting boxes. In use, it provides flexibility for
the specifier, easy installation for the contractor and convenience for the end users.
3 pin plugs can be used safely in 4 pin outlets
•
LSC pre-wired ceiling assembly with 2 or 3m of cable, ideal for suspended ceiling lighting
•
Spacious easy wire plug with quick cover release screws
•
Bases will take up to 2 x 4.00mm
•
2
cables
4 pin system
This version has been specifically designed for applications where an extra live conductor is
required i.e. emergency lighting. It has all the benefits of the 3 pin system, but the auxiliary
live conductor gives greater flexibility in switching capabilities. It can also be used as a
time delay trigger mechanism and offers greater control over multi-lamp luminaires.
Red plug top and cover ensures easy identification of 4 pin circuit
•
The first 4 pin system to comply with BS 7001
•
Large outlet terminals will take up to 2 x 4.00mm
•
2
cable
Terminal access designed to aid cable installation on outlet and plug
•
LDU Multi-outlet Box
The LDU Multi-outlet boxes utilise the LSC ‘plug-in’ lighting interface allowing luminaires
to be plugged in, providing safety without isolation of the circuit. The LDU (Lighting
Distribution Unit) incorporates LSC outlets which accept both Eaton’s 3 and 4 pin plugs.
The 4 pin plug uses the fourth auxiliary socket contact for emergency lighting requirements.
6, 8 and 10 outlet units available
•
Will accommodate 3 or 4 pin applications
•
Separate back box to enable first fix with simple plug connectors for front cover
•
Complies with the recognised industry interface BS 7001
•
Extensive range of pre-wired plugs available in both HR (Heat
•
Resistant) and LSF (Low Smoke and Fume) cable
Mounting options – wall, ceiling, trunking or suspension
•
Makes life easy – no need for on-site wiring of individual fittings
•
Steel box for harsh environments
•
Interchangeable front covers (6, 8 and 10) to enable, if required, expansion at a later date
•