34 / 36
IAC Touch Screen Display
FEATURES
• Mounts on IAC base unit or
optional panel mounting
• Touch sensitive graphic LCD
screen
• Menu operation for interrogation
and setting
• Back-lit screen for easy viewing
• Communicate with up to 31 IACs
• Battery backed clock
• Displays up to 256 parameters
Touch Screen for IAC 600 Controller
This optional Touch Screen gives access to up to 31* IAC base units on its own sub-
LAN (including the IAC 600, 400, 420 and 200). The Touch Screen can be mounted
direct on the IAC 600 base unit.
The Touch Screen allows the user to interrogate the IACs. Information on sensor
values and outputs can be displayed and parameters can be altered if required. The
Touch Screen’s battery backed clock is used by the IACs on the sub-LAN as a back-up
to their own internal clocks.
*Dependent on the number of parameters to be displayed.
INSTALLATION DETAILS
Power supply:
Powered from the IAC
unit or separate 24 Volt Vac supply
Power failure reserve:
Non volatile RAM
with built-in Real Time Clock gives 3
year back up of clock and memory under
normal conditions of use.
Power Consumption:
2-5 VA
ACCESSORIES
DDC 2601
Remote Touch Screen
Adaptor Kit
Description
IAC-TS
Touch Screen for IAC 600 Controller
Data Sheet 2.951
IAC DISPLAY
FEATURES
• Fully networkable or stand-
alone controllers
• Selectable control applications
(fan-coil applications)
• Low installation cost
• Simple setup using PDA hand-
held computer or PC via infra-red
or RS 232 link
• Designed to maximise
energy savings
• Optional networking
to an MicroNet system
• Supports S-Link sensors
UniFact® Pro Terminal Unit Controllers
The UNIFACTPRO Terminal Unit Controllers have been designed to meet virtually
any fan-coil heating/cooling applications. The controllers can be used as stand-alone
devices or can be networked to MicroNet systems.
The controller has three main switchable modes: comfort (day), night (off) and
economy.
INSTALLATION DETAILS
Control range:
0 to 40°C
Power supply:
230Vac
Power Consumption:
230 Vac @ 12 VA maximum including outputs
Power failure reserve:
EEPROM preserves configuration data and user settings
Controller type
Inputs/outputs
URC-41N-10X
with on/off fan control and S-link support
2 x DI
1 x RI – temperature
1 x AI – setpoint
4 x DO – triacs
3 x DO – relays
URC-51N-10X
with 3-speed fan control and S-link support
Where X denotes the pre-loaded application
(possible to change on the field)
0 = 4-pipe FCU, 1 = 2-pipe with changeover,
2 = DX cooling and electric heater, 3 = airside control
URC-IR-100
Infra-red/RS 232 Receiver
URC-SET-100
NCP Palm Commissioning Software
Data Sheet 10.130
Networkable Terminal Unit Controllers
Terminal Unit
Controllers
34
Satchwell Product Catalogue – SATCHWELL Sigma – IAC Touch Screen Display