Satchwell Sigma
Universal Network Controllers
Satchwell Product Catalogue – Satchwell Sigma – Universal Network Controllers
S-632 Universal Network Controller
The Satchwell Sigma Universal Network Controller (UNC632) is fully intelligent
and incorporates its own 32-bit microprocessor providing Direct Digital Control of
plant. It is specifically designed for sites and applications with low object counts.
After initial programming from a Satchwell Sigma server, the S-632 scans and
monitors dedicated functions and will automatically decide on any control
action necessary. It can operate independently of other system components and
communicates with any selected Sigma Client only when necessary to provide data
such as alarms or logging information, or on demand by the operator.
Each controller can monitor and control up to 32 individual items of plant.
The S-632 can operate in a stand-alone mode, or it can be networked as
part of a Sigma building management system. Networking can be either to a local
area network or, as a single controller, directly into the wide area network of Sigma.
For systems which need additional resilience, the Dual Trunking options provide
redundancy and allow for cabling and other communications channel failures.
Description
S-632-A
UNC632 Universal Controller, ARCNET
S-632-E
UNC632 Universal Controller, Ethernet
S-632-AE
UNC632 Universal Controller , ARCNET/Ethernet & Sigma LAN
Data Sheet 13.312
ACCESSORIES
S-UNC-4DO
Digital Output Module
S-632-KB
Sigma UNC Keyboard option
S-TK
Trunking kit for S-x32, S-DNN3, S-IC3
INSTALLATION DETAILS
Power supply:
230Vac ±10%. Switch selectable to 115Vac ±10%
Supply frequency:
50/60Hz ±10%
Power Consumption:
15VA typical, 24VA maximum
(Triac outputs require a separate 24Vac supply).
Protection class:
IP 40 by use of the trunking kit.
Mounting:
Wall or panel mounting
Power Failure Reserve:
Rechargeable battery gives typically 90 day back up of object
data stored in RAM, and of the real time clock
INPUTS AND OUTPUTS
I/O Point type
Description
Quantity
Analogue Inputs
Jumper link configurable for resistance (0 to 10k
Ω
),
current (0 to 20mA) or voltage (0 to 10V).
Can also be jumper link configured as digital inputs
8
Digital Inputs
Voltage free SPST contacts (open/closed).
Can be used for pulse totalisation (maximum pulse
frequency 10Hz).
10
Analogue Outputs
0 to 10Vdc signals (Maximum 1mA per channel).
Can be used as digital outputs by using the Digital
Output Module
6
Triac Outputs
24Vac. Maximum switching current 0.6A,
minimum 20mA at 24Vac. External plant should be
switched via externally mounted contactors.
8
FEATURES
• Intelligent 32-bit microprocessor
technology
• Up to 32 configurable input/
output objects & 55 software
objects
• Stand-alone capability
• Local and wide area networking
capability
• Optional ARCNET® or Ethernet
communications
• Flexible and configurable
application software
• IP 40 Protection Class
• Optional keyboard and display
• Permanent local storage of
configuration (object) and
accumulated data
• Integral IP (Internet Protocol)
addressing
• Dual Trunk capability (redundant
networking)
• Dual image Hot-Swap Flash
EPROM for fast and easy firmware
upgrades
• Contingency Logs held in RAM,
viewable via Sigma Client, WinCE
and/or Web.
• 115Vac/230Vac selectable
• ARCNET and Sigma LAN fully
opto-isolated
• On board modem port
25