IP RATINGS
l
The IP (Ingress Protection) rating given to an enclosure states the degree of protection it offers by means of two digits.
A summary of these is shown below; for a more detailed definition, see IEC 529: 1989, BS EN 60529: 1992.
The letter X can be used in place of the first or second digit to
indicate that tests have either not been made or are not applicable.
N0TE:
In the event of additional holes being drilled/pierced or knockouts removed,
suitable measures should be taken to restore the products to the original
ratings.
IEC 529, BS EN 60529 does not apply to protection against the risk of
explosion or conditions such as humidity, corrosive gases, fungi or vermin.
n certain cases equipment designed to be mounted in an enclosure will
contribute towards the stated IP rating (eg pushbuttons mounted in an
nclosure). Different parts of enclosures can have different degrees of
protection and still conform to the standard (eg enclosures with pre-drilled
conduit entry).
FIRST DIGIT
Protection against solid foreign objects and access to hazardous parts
The first digit covers protection against penetration by solid objects, which includes
hands and tools such as screwdrivers.At the lowest of seven levels, 0, no protection
is offered, either of the equipment itself from damage by intrusion or of a person
contacting live or moving parts. At the highest, 6, there shall be no entry of dust.
SECOND DIGIT
Protection against ingress of water
The second digit covers the degree of protection against the entry of water, on a
progressive scale. For example, number 1 indicates that dripping water shall have no
harmful effect, and number 6, that water projected in powerful jets against the
enclosure from any direction shall have no harmful effects.
A
B
FIXING CENTRES
List Number
A
B
VX5020
63
mm 54mm
VX5040
63
mm 54mm
VX5100
63
mm 54mm
VX5200
56
mm 111mm
VX5300
56
mm 111mm
VX5080
-
46
mm
VX5090
-
46
mm
List Number
A
B
VX5030
44
mm 122mm
VX5050
44
mm 195mm
VX5073
-
46
mm
VX5123
-
96
mm
VX5180
50
mm 120mm
VX5270
116
mm 206mm
50
mm
12
mm
2.5
mm
1.5
mm
60
0
Not protected
1
Protected against solid objects
greater than 50mm diameter
0
Not protected
1
Protected against dripping water
Protected against dripping water
2
when tilted up to 15 degrees
3
Protected against spraying water
4
Protected against splashing water
5
Protected against water jets
6
Protected against powerful
jets of water
7
Protected against the effects
of immersion
8
Protected against submersion
2
Protected against solid objects
greater than 12mm diameter
3
Protected against solid objects
greater than 2.5mm diameter
4
Protected against solid objects
greater than 1.5mm diameter
5
Dust protected
6
Dust tight
Technical Information
74