13 / 211
For 6A ceiling switches see Capital Lighting section, page 17.
CAP I TAL
CONT ROL
13
2400
2402/E
2161
2163
2167
SHAVER SUPPLY UNIT
l
BSEN 61558-2-5
PACK QTY
input 240V 50Hz
1
2400
output
{
115V 50Hz
240V 50Hz
Dimensions
86mm x 146mm
Mounting boxes
9053 surface, SB628 flush galv. or SB631 dry lining
Complies with the requirements of the IEE Wiring Regulations (BS 7671) for use in
rooms containing a fixed bath or shower.
LIGHT & SHAVER UNIT
l
BS EN 61558-2-5, BS 4533-102.1
PACK QTY
input 240V 50Hz
Unswitched
1
2402/E
output
{
115V 50Hz
240V 50Hz
60W 284mm tungsten lamp
Dimensions
492mm x 59mm x 70mm
Complies with the requirements of the IEE Wiring Regulations (BS 7671) for use in
rooms containing a fixed bath or shower.
LIGHT & SHAVER UNIT
Tough, impact resistant, all-moulded construction.
Diffuser is removed complete with lamp fitting to facilitate safer lamp changes.
60W lamp can be switched independently by a separate pull switch.
Moulded back-plate may be used as a template.
The transformer incorporated in this product has an isolating 20VA loading
and outputs of 230V & 115V.
Suitable for use for ‘Mains shavers only’.
Incorporates an automatic thermistor protection device.
Accepts most standard British, Continental, American and Australian 2 pin plugs.
Pull switch operates both lamp and socket.
16A CEILING SWITCHES
l
BS EN 60669-1
PACK QTY
2 way SP
10
2161
1 way DP with neon indicator
10
2163
Dimensions
68.5mm diameter x 42.5mm
Mounting boxes
Integral pattress for surface mounting.
Can be mounted to a small circular conduit box.
Two way switch may be wired as one way.
Standard pull cord/acorn is 1.5m long, in white.
Fully rated for fluorescent or inductive loads.
Suitable for use with 16mm x 16mm mini-trunking.
50A CEILING SWITCHES
l
BS EN 60669-1
PACK QTY
1 way DP with neon and
1
2167
mechanical indicator
Mounting boxes
Integral pattress for surface mounting.
Can be mounted to a large circular conduit box.
Complies with the requirements of the IEE Wiring Regulations (BS 7671) for use as an
isolating device.
Terminals will accept up to 10mm
2
cable.
Standard pull cord/acorn is 1.5m long, in white.
Suitable for use with 25mm x 16mm trunking.
Rated for non-inductive loads only.