157 / 221
157
The next generation of Cembre
cordless hydraulic tools represents
a significantly advantageous evolu-
tion from current models.
The B 550E, with adapter AU55-
50, will accept all Cembre 50 kN
dies; with adapter AU55-W it
will accept "W" dies.
New Li-Ion 18 V 4 Ah batter-
ies offer a higher capacity than
14.4 V 3 Ah, while greater
crimping speed and crimping
force result from a revitalised hy-
draulic system with double speed
action: a rapid approach of the
dies to the connector then a slower,
more powerful speed for crimping.
A maximum pressure sensor and
pressure relief valve assure greater
precision and repeatability of the
pressure cycle and double the pro-
vision for operator safety.
The OLED display provides essential
real time tool operating information
data including:
- Crimping pressure and force be-
ing generated, for confirmation
of adherence to norms and best
practice
- Battery power availability
- Tool identification, LED work light
state, reset, no. of operational
and service crimping cycles
- Tool service required to maintain
optimum condition.
Designed with improved balance,
B550E is easily manageable during
the crimping process and, by the
use of bi-component plastics, has
a shell with high resistance to wear
and damage.
Rubber grip inserts, low noise
and minimal vibration aid operator
comfort while additional conveni-
ence and safety are provided by
LED lighting of the working area.
Crimping cycle data (up to 200,000
events) is automatically stored on a
memory card for transfer to PC by
USB interface.
Operating temperature:
-15 to +50 ° C
With adapter AU55-50 for accepting Cembre dies.
Cembre
die
AU55-50
adapter
Suitable for installing the same
range of connectors of B 550E,
B 550E-KV tool is provided with
additional coatings to protect
the operator and tool against
accidental brush contact with
energised conductors.
Particularly suitable for Power
Supply Companies.
B 550E
18.0 V CORDLESS HYDRAULIC CRIMPING TOOL
general features
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m
2
Copper lugs
and splices
Insulated
terminals
End
sleeves
“C” sleeve
Connectors
240
120
120
70
Crimping
force
kN
Weight kg
(with battery)
Battery
Li-Ion
length
height
width
D i m e n s i o n s m m
57.7
358
358
83
18.0 V 4.0 Ah
5,3
The tool is supplied as
:
•
Basic tool with battery, wrist
strap and shoulder strap
•
Spare battery
•
Battery charger
•
USB cable
•
Plastic carrying case
suitable for storing the
tool and accessories
S T O R A G E
Type
Dimensions mm Weight
kg
Supplied
with the tool
Purchase
separately
VALP40
520x432x126
2,6
�
—
These tools are supplied without dies. For die selection, please refer to chart on pages 178 to 190
With adapter AU55-W for accepting “W” dies.
“W” die
AU55-W
adapter
B 550E-KV
New
New
18V Li-Ion
B
A
T
T
E
R
Y
N
E
W