33 / 40
33
Lighting Control Catalogue
LON I/OModule REG-N 8DI 8DOAC
Image
Part Number
Features
35237-348
• Independent switching of eight load groups
• For control of electro-thermal control valves
• Eight inputs for connection of devices with floating contacts
• Eight outputs: semiconductors AC 24 V (external supply required)
• Manual operation and status indication per output and input
• Supply voltage: DC 24 V
• Pluggable screw-type terminals
• Width of device: approx. 72 mm (4 pitch)
• Software application for control of eight independant consumer loads according to LonMark profile
“Valve Positioner (8131)” or “Lamp Actuator (3040)” (two different applications). The slopes at the digital
inputs are translated according to LonMark profile “Switch (3200)”
Combined In-/Outputs
LON I/OModule REG-S 4W4DI 24V
Image
Part Number
Features
35236-150
• Four inputs (AC 24 V) and four relay outputs (changeover contacts, 10 A)
• Independent switching of four load groups
• Connection of four push buttons or other floating contacts
• Contact voltage per input: approx. AC 24 V
• Contact current per input: approx. 10 mA
• Manual operation and status LED for every input and output
• Power-down detection
• Pluggable screw-type terminals
• Supply voltage: AC 230 V
• DIN rail mounting according to EN 50 022
• Width of device: approx. 105 mm (6 pitch)
• Software application for control of four independent consumer loads according to LonMark profile “Lamp
Actuator (3040)” including timers, logic operation, prioritised control and configurable reaction of the
outputs to power-down/power-up/bus reset. In addition, two “Scene Controllers (3251)” are available and
a definable group of outputs can be switched on and off simultaneously. The slopes at the digital inputs
are translated according to LonMark profile “Switch (3200)”, “Scene Panel (3250)” or “Occupancy Sensor
(1060)” for light or sunblind control including configurable pulse-edge evaluation.
LON I/OModule UP 6DI 2DO
Image
Part Number
35212-362
• Connection of conventional push buttons or other floating contacts
• Six inputs and two outputs
• Mounting in installation socket of 63 mm depth
• Clamp-type terminals
• Supply voltage: DC 24 V
• Contact voltage: approx. DC 24 V
• Dimensions: 57 x 57 x 21 mm (H x W x D)
• Software application according to LonMark profile “Switch (3200)” for light or sunblind control
UPI
FTT
24VDC
UPI
FTT
24VDC
FTT
24VDC
UPI