19 / 180
19
ARGUS 220 movement detectors
MTN50523119
Electronic movement detector. 220° surface monitoring for large house fronts and sections of the house.
n
360° short-range zone (approx. 4 m radius).
n
Large wiring compartment and plug system.
n
Looping is possible.
n
LED function display for fast alignment at the installation site.
n
Operating elements are protected under the easily accessible cover plate.
n
Flexibly adjustable sensor head.
n
Possible to blank out individual lens areas.
Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners
and stationary pipes using a mounting bracket.
n
Functions: Up to four radio ARGUS 220 CONNECT devices or switch actuators can be networked and set
via the remote control (permanent ON, permanent OFF, automatic, brightness threshold, switching time, set and
change the sensitivity to movement.)
n
In conjunction with the CONNECT radio configuration tool, you can:
- Fully integrate the radio ARGUS 200 CONNECT into the radio network and network with other devices.
- Twilight switch function.
n
Nominal voltage: AC 230V, 50 Hz
n
Incandescent lamps: AC 230V, max. 2000W
n
Halogen lamps: AC 230V, max. 2000W
n
Fluorescent lamps: AC 230V, 1200W uncompensated
n
Capacitive load: max. 35 μF
n
Max. switching current: 16A, AC 230V, cos
ϕ
= 1
n
Angle of detection: 220°
n
Range: max. 16m
n
Number of levels: 7
n
Number of zones: 112 with 448 switching segments
n
Light sensor: continuously adjustable from 3-1000 lux
n
Time: 1 sec. to approx. 8 min. in 6 steps
n
Sensitivity: continuously adjustable
n
Neutral conductor: required
n
Sensor head adjustment for wall mounting: - 9° up, 24° down, 12° left/right, ±12° axial
n
Sensor head adjustment for ceiling mounting: - 4° up, 29° down, 25° left/right, ±8.5° axial
n
EC guidelines: Low voltage directive 2006/95/EEC and EMC directive 2004/108/EEC
n
Radio frequency: 868 MHz
n
Transmission range: up to 100 m in free field, up to 30 m indoors
n
Type of protection: IP 55
n
Dimensions: 151x93x71mm (HxWxD)
n
Accessories: Remote control for radio ARGUS 220 CONNECT MTN5052-1100, Mounting bracket TN565291,
Capacitor MTN542895
n
Contents: With cover plate and segments to limit the area of detection, screws and plugs.
Part number
Description
Qty
MTN50523119
Polar white
1
MTN50523160
Aluminium
1
Connect
Lighting control &
automation
Remote control for ARGUS 220
One radio ARGUS 220 CONNECT or one radio receiver switch each can be linked, networked and set for each
key (A1-A4) on the remote control.
n
Functions: You can set the following functions on the ARGUS: Operating mode (permanent ON, permanent
OFF, automatic), brightness threshold, switching duration, set and change the sensitivity to movement.
n
Channels: 4
n
Radio frequency: 868 MHz
n
Range: up to 100 m in free field, up to 30 m indoors
n
Battery: 1 lithium button cell (CR 2450N)
n
Display elements: Status LED
n
Receiver: Radio ARGUS 220 CONNECT MTN5052-31.
n
Contents: With battery.
Part number
Description
Qty
MTN50521100
Remote control for ARGUS 220
1
Capacitor
For use in push-button circuits to prevent flickering of the neon lamp and/or instantaneous switching of the
installation relay when several push-buttons with neon lamps are in use.
For interference suppression of inductive loads, e.g. relays, contactors, fluorescent lamps, transformers, if the
induction voltage of these devices leads to the retriggering of the ARGUS.
Part number
Description
Qty
MTN542895
AC 230 V, 0.33 μF
1
MTN542895
MTN50521100