148 / 204
148
Lighting
Shaver lights (lamp included)
A stylish range of four shaver light units are designed to complement even the most modern of bathrooms, the
soft lines ensure compatibility with any décor whilst limiting dust and dirt collection. Even light dissipation is
achieved through the opal diffuser whilst also providing safe disconnection of lamp contacts (when removed
for easy replacement of lamps – 60W variants only).
Careful attention has been paid for fast and easy installation including a removable back plate and terminal
access for wiring even after the unit has been fixed to the wall. The range is fully certified to all of the relevant
safety standards.
Lighting in locations containing a bath or shower.
These illustrations and the advice below are based on BS 7671:2008 the IEE Wiring Regulations 17th Edition,
Section 701. For full details please look in this document.
For lighting installed in Zones 1 and 2 all luminaires must be at least IPX4, or IPX5 if water jets are used for
cleaning. The GET Shaverlight range is IP20 and must be installed outside Zones 0, 1 and 2.
All circuits for current-using equipment and accessories must be protected by RCD’s of 30mA rating.
SELV (12V ac) luminaires must have the SELV source (transformer) outside the zones e.g. in the ceiling void.
Features
■
Stylish modern design blends with any décor
■
Opal diffuser for a softer light
■
Fitted with earth looping terminal
■
Supplied with loose back plate for faster fixing
■
60W fittings provide safe disconnection of lamp contact once the diffuser is removed
■
Easy connection method
■
Suitable for use in bathrooms (see Zone information below)
■
Manufactured in flame retardant polycarbonate
■
IP20
■
Maximum lamp rating 60W
■
Supplied pre-fitted with 284mm striplight or 11W CFL fluorescent lamp
■
Manufactured in flame retardant polycarbonate
■
Compatible with UK, Europe, Australia and USA regulations
■
Complies with BS EN 60598-2-1
■
Lamps: 60W Striplights or 11W CFL fluorescent (lamps included)
■
Dimensions: 500mm(L) x 60mm(W) x 70mm(H)
Part number
Description
Qty
GSHVLITL
60W Tungsten single voltage 230V output
1
GSHVLIT2L
60W Tungsten dual voltage 115/230V output
1
GSHVLITFL2L
11W Fluorescent dual voltage 115/230V output
1
Bathroom lights must be
installed in accordance
with IEE regulations,
Shaver lights have
concealed/protected dual
voltage shutter socket
Shaver lights