Basic HTML Version
5/70
Technical
Section 9
Dimensions
Section 10
Argus surface mounted
movement detectors
Movement
detectors
5
ARGUS 300
Description
Part number
Polar white
MTN564319
Technical data
Mains voltage: AC 230 V, ± 10 %, 50 Hz
Incandescent lamps: max. 3000 W
Halogen lamps: AC 230 V, max. 2500 W
Capacitive load: max. 140 μF
Max. switching current: 16 A, AC 230 V, cos
ϕ
= 0,6
Power consumption: <1 W
Angle of detection: 300°
Range: max. 16 m
Number of levels: 7
Number of zones: 123 with 492 switching segments
Light sensor: infinitely externally adjustable approx. 3-1000 lux
Time: externally adjustable in 6 levels of approx. 1 sec. to approx. 8 min.
Neutral conductor: required
Possible to adjust the sensor head: Horizontal rotation to the left and right by 30°.
Swivelling of the sensor head to the right or left by 45°.
EC guidelines: Low voltage guideline 73/23/EEC and EMC guideline 89/336/EEC
Type of protection: IP 5
Accessories: Capacitor, Part number MTN542895.
Contents: With 2 blanking inserts to limit the area of detection, unlocking clamp,
screws and plugs.
Extension
Description
Part number
Polar white
MTN554399
The extension between wall bracket and sensor head can be installed for the
ARGUS 300 in order to increase the distance between the movement detector
and the wall. Obstacles such as downpipes, which blank the area of detection if
mounted on corners, can be prevented.
Length: 11.5 cm
Area of detection
The specified ranges refer to average conditions and
a mounting height of 2.50 m and should therefore
be taken as guide values. The range can vary greatly
depending on the weather.
A =Inner safety zone with an area of detection of 360°
within a radius of approx. 4 m.
B = Middle safety zone with a detection angle of 300°
and a radius of approx. 7 m.
C = Outer safety zone with a detection angle of 300°
and an area of detection of approx. 16 m x 20 m.
Electronic outdoor movement detector.
300° surface monitoring for mounting on house corners in order to secure the area
of two house walls. 360° short-range zone with a radius of approx. 4 m.
The plug-in system and the enlarged wiring compartment facilitate simple and
convenient installation.
The range of the area of detection can be adjusted in sectors with three selectively
adjustable 100° sectors. This makes it possible to compensate for a site that slopes
upwards or downwards.
Function bar for configuring brightness, time and sensitivity (range). The integrated
function display allows the ARGUS to be aligned quickly and easily at the
installation site. The universal housing allows these detectors to be mounted on
house corners without requiring additional accessories. The area of detection can
be optimally adapted to prevailing on-site conditions with the aid of the spherical
head which can be adjusted horizontally, vertically and axially. To prevent obstacles
such as downpipes from blanking the area of detection, ARGUS 300 can be
installed with an extension.
9933_Section_05.indd 70
11/08/2009 22: