Basic HTML Version
5/69
Argus surface mounted
movement detectors
Movement
detectors
Technical
Section 9
Dimensions
Section 10
ARGUS 220 advanced
Description
Part number
Polar white
MTN565419
Electronic outdoor movement detector. 220° surface monitoring for large house
fronts and sections of the house.
The movement detector for outdoor areas
n
360° short-range zone with a radius of approx. 4 m
n
Sensitivity: infinitely adjustable
n
Very easy installation thanks to large wiring compartment and plug-in connection
system
n
Looping through is possible
n
Integrated LED function display for alignment at installation site
n
Potentiometers for adjustment are protected under the easily accessible cover
plate
n
Can be installed on walls and ceilings without additional accessories
n
Can be mounted on inner/outer corners and stationary pipes with installation
bracket, Part number MTN5652
n
The area of detection can be adjusted to local conditions with the aid of the
spherical head .which can be adjusted horizontally, vertically and axially
n
The design is independent of the position of the sensor head
n
Possible to blank out individual lens areas
n
Potentiometers for setting functions are located underneath the cover plate
Technical data
Mains voltage: AC 230 V, ± 10 %, 50 Hz
Incandescent lamps: AC 230 V, max. 2000 W
Halogen lamps: AC 230 V, max. 2000 W
Fluorescent lamps: AC 230 V, 1200 W uncompensated
Capacitive load: max. 35 μF
Max. switching current: 16 A, AC 230 V, cos
ϕ
= 1
Angle of detection: 220°
Range: max. 16 m
Number of levels: 7
Number of zones: 112 with 448 switching segments
Light sensor: infinitely adjustable from 3-1000 lux
Time: 1 sec. to approx. 8 min. in 6 levels
Sensitivity: infinitely adjustable
Neutral conductor: required
Possible to set the sensor headWall mounting: 9° up, 24° down, 12° left/right, ± 12°
axial
Ceiling mounting: 4° up, 29° down, 25° left/right, ± 8.5° axial
EC guidelines: Low voltage guideline 73/23/EEC and EMC guideline 89/336/EEC
Type of protection: IP 5
Accessories: Mounting bracket, Part number MTN565291.
Capacitor, Part number MTN542895.
Contents: With cover plate and segments to limit the area of detection, screws and
plugs.
Mounting bracket
Description
Part number
Polar white
MTN565291
Installation bracket for attaching the ARGUS 110/220 Basic, Timer or Connect
to outer or inner corners. Can also be secured to fixed pipes (VDE 0100) with
conventional conduit clips.
Contents: With screws and plugs. Without conduit clip.
Area of detection
A = Inner safety area with an area of detection of 360°
within a radius of approx. 4 m.
B = Middle safety zone with a detection angle of 220°
and an area of detection of approx. 9 m x 18 m.
C = Outer safety zone with a detection angle of 220°
and an area of detection of approx. 16 m x 28 m.
The specified ranges refer to average conditions and
a mounting height of 2.50 m and should therefore
be taken as guide values. The range can vary greatly
depending on the weather.