The Hamilton Collection, excellence and elegance...

337 / 348

Due to constant changes in regulations, etc. users should satisfy themselves there have been no amendments. 337
E&OE 01/13
Technical Specification
TRA I L ING EDGE PUSH ON/OFF DIMMERS
Fits one Grid-IT
aperture
1mm2 1.5mm2 2.5mm2 4mm2
Multi-Strand
6mm2
Terminal Capacity 2 2
Earth Terminal Capacity 5 4 3 1 1
DTE 1XTE 2XTE
W2XTE
3XTE 4XTE
W4XTE
CATEGORY:
TRAILING EDGE DIMMER GRID-IT TRAILING EDGE DIMMER MODULES
60.3mm
Fixing Centres:
TECHNICAL SPECIFICATION:
Wattage: 250W Resistive
210VA Inductive
Current Rating: 1.1 Amp per gang
Max Load: 250W Resistive
210VA Inductive
Minimum Load: 25W/25VA
Voltage: 220/250V AC
IP Rating: IP2XD
Switched Poles: Single
Contact Gap Minimum: None
Product Class 1: Face plate must
be earthed
Ambient Operating Temperature: -5° to +40°C
Location: Internal Use Only
Max Installation Altitude: 2000m
STANDARDS:
BS EN ISO Standard: BS EN 60669-2-1
TRAILING EDGE DIMMER
See Notes for Dimmers: Note A,B, C, E
Technical Insert Ref: Description:
1XTE 1 gang 250W/210VA Multi-Way Dimmer
2XTE 2 gang 250W/210VA Multi-Way Dimmer
3XTE 3 gang 250W/210VA Multi-Way Dimmer
4XTE 4 gang 250W/210VA Multi-Way Dimmer
W2XTE 2 gang 250W/210VA Multi-Way Dimmer
max 200W per gang
W4XTE 4 gang 250W/210VA Multi-Way Dimmer
max 200W per gang
GRID-IT TRAILING EDGE DIMMER MODULE
See Notes for Dimmers: Note A,B, C, E
Technical Insert Ref: Description:
DTE 1 gang 250W/210VA Multi-Way Dimmer
Module
TERMINAL CAPACITY:
TRAILING EDGE TECHNOLOGY DIMMERS. Are suitable for control of both resistive and inductive loads. When used for dimming
low voltage electronic halogen transformers it must be noted that the dimmer controls the primary side of the transformer.
120.6mm
Note: For multi-way switching a push to make retractive switch should be installed in the other positions. (Note: standard two way switches will not work with this
product).