Basic HTML Version
3/121
system
The Spacial SF range includes specific enclosure models for installing the Prisma
Plus P system: functional units and vertical and horizontal busbars.
The panels are subject to type tests according to standard IEC 61439-2.
Partition types: forms 2 and 3 thanks to the components of the Prisma Plus P
system.
RAL 7035 grey, IP 55, IK 10.
Specific finishes and colours are available on demand using our customisation
service.
The offer consists of:
• Steel suitable enclosures, height 2000 mm.
• Width 700 mm for installing Prisma P functional units and width 300 mm for
installing cable ducting or vertical busbars.
• Depths 500 and 600 mm for panels up to 1600 A.
• Depth 800 mm for panels up to 3200 A or connection of devices by the rear.
To create mixed power distribution and automation panels, the Spacial SF
enclosures for Prisma Plus P system can be coupled with standard Spacial SF
enclosures and therefore use the universal mounting accessories.
Note: The standard Spacial SF 400mm width can also be used for cable ducting.
Electrical characteristics
The installation of devices with the Prisma Plus P system for Spacial SF allows
the installation of low-voltage equipment compliant with standards IEC 50298,
IEC 62262 and IEC 61439-2 and having the following characteristics:
• Rated insulation voltage of the main busbar: 1000 V.
• Rated operational current: In 3200 A.
• Rated peak withstand current: Ipk: 187 kA.
• Rated short-time withstand current: Icw 85 kA eff/1 s.
• Frequency: 50/60 Hz.
Mechanical characteristics
• Galvanised-steel framework.
• Sheet-steel panels, painted with epoxy-polyester resin, textured finish,
RAL 7035 grey.
• The panels can be removed.
• The frameworks can be coupled side-to-side or back-to-back.
• IP 55.
• IK 10 (IK 08 for glazed doors).
Configured
Specific
Specific finishes and colours,
please contact us.
03_121_135_SFM080.indd 121
20/