![]()
Email
sales@marshall-tufflex.com
www.marshall-tufflex.com
Underfloor to desk
| 231
Technical information
Series 507 Powertrack
Series 507 Powertrack is an
underfloor busbar system rated at
63Amp maximum. It is available in
Standard or CE (Clean Earth) versions.
Lengths
• Powertrack lengths of 1.2m, 1.8m , 2.4m
and 3.6mwith tap-off outlets at 300mm
Safety
• Snap-fit feed units, couplers and tap-
offs are key and colour-coded to avoid
assembly errors.
• A shutter is operated on insertion to
prevent accidental contact.
• Avoid exceeding the maximum
power rating of the track. This is
ascertained by the maximum power
requirement for each floor outlet box
Positioning
• For the most economic format, it is
advised that Series 507 Powertrack is
arranged in parallel runs with
powertrack feed units orientated to
the incoming supply.
• For optimum layout flexibility, spacing
should be a maximum of 5.5m
between each length of track and
2.5m from the perimeter when using
a standard 3m tap-off to a floor box.
Installation
• With the first length of powertrack,
snap the integral coupler into the
feed unit socket.
• Fit the next length of powertrack to
the first length by means of the
integral coupler socket.
• Secure the feed unit to the floor via
the slots in the base.
• Secure the powertrack every
1200mm (max) using the mounting
brackets provided.
Tap-offs
• Each tap-off position along the
powertrack is protected by a shutter.
• Provision of power from the
powertrack is provided by inserting a
key and colour coded tap-off into a
shuttered socket.
• The tap-off unit comes complete
with 4.0mm² LSOH cabling welded
directly to the contacts with a flexible
outer steel conduit.
• Available in 3m and 5m lengths
• Fused or unfused
• Remove the tap-off by releasing the
twin clips that operate automatically
on plug insertion. Tap-offs can be
removed when the system is live.
Standard = grey
CE = red
