75 / 130
75
ceiling mounting –
trapeze
EDF
n
EDF – profile pendants / mounting rails
All dimensions (mm) are nominal
For wall mounting : see p. 58
➔
Pre-galvanised
Hot dip galvanised after
manufacture
Stainless steel 304L
Stainless steel 316L
GC
304L
316L
For detailed information related
to inishes, refer to
p. 116-117
Key :
GS
30
105 mm
100
600 mm
L
L
L
W
L = W (tray width)
+ 50 mm
x2
x4
TR 06
EEC6
EEC8
TR 08
Use with threaded rod and fasteners to form a trapeze hanger to
suspend 100 mm to 600 mm wide steel wire cable tray in 30 mm to
105 mm depths from the ceiling or use with PFREDF to form a pendant
installation (opposite).
Can be mounted directly onto the wall for use with cantilever arms
(see p. 58)
Supplied singly without fasteners
EDF mounting rails suspending wire tray from the ceiling with threaded
rod and fasteners (not supplied)
Use 2 x TR06 or TR08 (M6 / M8 x 3m)
threaded rod and 4 x EEC6 or EEC8
(6 or 8mm diameter) hex nuts
(not supplied) to suspend EDN from ceiling
Suspending EDF from ceiling - trapeze mounting
Securing EDF mounting rail to steel wire cable tray
Use 1 x BTRCC 6 x 20 and 1 x CE25 to to
secure 50 mm to 200 mm tray EDF
For 300 mm to 600 mm tray use 2 x
BTRCC 6 x 20 and 2 x CE25
To cut the correct size EDF for
trapeze hanging, add 50 mm to
the chosen tray width to allow for
ixing of threaded rod either side
of the tray, e.g. if using 200 mm
wide tray, cut EDF to 250 mm wide
EDF2000
2 000
2·40
2·56
2·48
2·48
Cat. No.
316L
Weight (kg)
304L
GC
GS
mm
L
All weights are given in Kilograms (kg)
Please use Cat. No. when placing your order, see p. 27
BTRCC
6 X 20
x1
CE 25
x1
n
Dimensions and weights
n
Assembly
n
Installation