![]()
ALPHA FIX Terminal Blocks
Terminals with Spring-Loaded Connection
8WH through-type terminals
12/8
Siemens ET A1 · 10/2008
12
■
Overview
With two clamping points
The through-type terminals have an impressive space-saving
design and offer optimized handling. With its front connection
arrangement this series provides additional space between the
cable ducts for wiring.
The double bridge slot enables individual chain bridging with
connecting combs. Accessories are available for testing and
labeling.
With three clamping points
Terminals with three clamping points are a space-saving alterna-
tive to the standard through-type terminals for branching the po-
tential.
It is often necessary for three conductors to be routed to a single
terminal.This three clamping point version enables this without
the need for additional terminals and bridges.
With four clamping points
The double connection of the through-type terminals with four
clamping points enables four conductors to be connected to a
single potential. These versions are therefore suitable for use as
compact potential distributors.
PE/ground conductor function
The through-type PE terminals are available with the same con-
tour as the through-type terminals. Simply snap the terminals
onto the rail to achieve full mechanical and electrical contact
with the support rail.
The through-type PE terminals meet all the requirements of
IEC 60947-7-2:
• Low contact resistance
• Non-corroding clamping points
• Green-yellow enclosure
• Additional inscription options
■
Technical specifications
8WH2 000-0AE0.
8WH2 000-0CE07 8WH2 003-0AE00
8WH2 003-0AE01
8WH2 003-0CE07 8WH2 004-0AE00
8WH2 004-0AE01
Dimensions
• Width / length / width of cover in mm
4.2 / 48.5 / 2.2
4.2 / 60.5 / 2.2
4.2 / 72 / 2.2
• Height (NS 35/7.5 / NS 35/15) in mm
36.8 / 44
36.5 / 44
Technical specifications acc. to IEC/DIN VDE
• Max. load current in A / cross-section in mm²
17.5 / 1.5
--
17.5 / 1.5
--
17.5 / 1.5
• Rated impulse withstand voltage in kV / pollution de-
gree
6 / 3
• Overvoltage category / insulating group
III / I
Connection capacities
• Flexible with end sleeve with plastic sleeve in mm² 0.25 ... 1.5
• Flexible with end sleeve without plastic sleeve in
mm²
0.25 ... 1.5
• Flexible with two-wire connection end sleeve with
plastic sleeve in mm²
0.5
Stripped length in mm
10
Plug gage (IEC 60947-1)
A1
Insulation type
PA
• Flammability class acc. to UL 94
V0
Approval data (UL/CUL and CSA)
• Rated voltage / current / cable sizes
- UL/CUL: in V/A / AWG
300 / 15 / 26-14 -- / -- / 26-14
300 / 15 / 26-14 -- / -- / 26-14
300 / 15 / 26-14
- CSA: in V/A / AWG
300 / 15 / 26-14 -- / -- / 26-14
300 / 15 / 26-14 --
300 / 15 / 26-14
Support rails/protective conductor busbars
--
See section
Support rails
--
See section
Support rails
--
© Siemens AG 2008
