Background Image
Table of Contents Table of Contents
Previous Page  297 / 348 Next Page
Information
Show Menu
Previous Page 297 / 348 Next Page
Page Background

05/13

297

Ceiling Dimmer

ICDM1000 1000W Ceiling Dimmer

Product Features:

This dimmer is suitable for control of Tungsten Lamps from 40–1000 watts, dimmable electronic

transformers and toroidal transformers from 50–1000VA when used with Hamilton Push-to-make

Retractive Switches or Hamilton Touch Slave Dimmers or a combination of both (these parameters

may vary with other manufacturers products).

Suitable for 230/240 volt supply 50 or 60 Hz.

Multi-position control.

Overload Protection - when an over current is detected the dimmer will switch off and then restart

Over Temperature Protection - when a temperature is detected that exceeds safe operation limits

the dimmer will automatically switch off.

Soft Start Technology - to provide prolonged long lamp life

Lamp fade off slowly

Flicker-free operation

Applications:

Domestic Housing, Office and Commercial

Operating Range:

230V~50Hz/60Hz

40–1000W and 50–1000VA

Product Standards:

This product complies fully to the following

standards: EN 61347 and EN 55015.

Technical Insert Reference:

ICDM1000

Technical Specifications:

Voltage:

230/240V AC

IP Rating:

IP 2XD

Ambient Operating

Temperature:

0--55

O

C

Location:

Internal use only

Maximum Installation

Altitude:

2000 metres

Note:

This dimmer is not suitable for Fluorescent Lamps.

Do not cut the connecting cable from the dimmer.

Installation:

This ceiling dimmer should be installed by a qualified electrician in an

accessible well ventilated dry area. It should be clear of any

thermal insulation and where more than one dimmer is installed in the

same area we recommend a spacing of at least 15 cm between each

dimmer unit.

Operation:

A brief press on turns the light on, by keeping your finger pressed on

the switch the lights will go through a dimming cycle.

When the required level is reached remove the finger from the switch.

Another brief press will turn the lights off.

Pressing the control point again will bring lights back on at their

previous level.

Due to constant changes in regulations etc., user should satisfy

themselves there have been no amendments.

Product Dimensions

Optional Installations