7/54 jokab safety
ABB Low Voltage Industrial Products 0312
7
Safety mats
Certified according
to EN 1760-1.
Ribbed Surface
Polyurethane- Upper Surface
Contact Surface 1
Isolating Layer
Contact Surface 2
Contact!
Application:
•
Personal protection within the
dangerous areas around presses,
robots, production lines,
machines etc.
When connected to a suitable monitoring system stepping on
the Safety Mat will immediately be detected causing dangerous
machine movements to be stopped. This is made possible by
the detection of electrical contacts closing within the sandwich
construction of the Mat. As a load-bearing component the Mat
is made with a bottom plate of either synthetic material or metal.
The Safety Mat is provided with a ribbed surface, which is fixed by
adhesive to the surface of the Safety Mat.
The safety mat and its connection cabling can be supervised by a
suitable ABB Jokab Safety safety relay, which provides PL d.
The basic Mat construction consists of a ground plate of either
PVC, Aluminium or Stainless Steel which provides protection
against uneven ground etc. The Mat is made up of a sandwich
construction, the pressure contact switch consisting of two
conducting sheets separated from each other by a webbed
The ASK Safety Mat is used as personal protection
within the dangerous areas.
isolating layer. The internal switching surface is cast into a durable
polyurethane to protect against moisture, and this is then covered
with a top layer of ribbed or chequered rubber mat or a thin
aluminium plate.
Attachment to the floor is by means of a ramped edge trim or
a z-profile made of aluminium. The ramp profile has a channel for
connection cables.
Custom Mats can be made, i.e. special shape, resistant against
harsh industrial environments (mineral oil, acid, bleach etc.) or
with a non-slip surface or M12-co
ntacts.
Features:
•
Can be connected to a safety
relay, Vital or Pluto
•
Very durable
•
IP 67