Basic HTML Version
5/73
Argus presence system
Presence
detectors
Technical
Section 9
Dimensions
Section 10
Presence
Description
Part number
Polar white
MTN550590
n
Indoor presence detection
n
ARGUS switches on the light and leaves it switched on until presence is no
longer detected or the ambient brightness is sufficient. Can be used in offices,
schools, public buildings or homes, for example. The detector is installed in or on
the ceiling
n
For installation on the ceiling in a 60 mm installation box. Optimum height 2.50 m
n
The surface-mounted housing, Part number MTN550619, allows the presence
detector to be mounted on non-suspended ceilings
The device has 2 relay outputs:
Relay 1:
For brightness-dependent movement detection, e.g. lighting. The overshoot time is
infinitely adjustable within a range of between 10 seconds and 30 minutes. ARGUS
Presence constantly monitors the brightness in the room. Then, when there is
sufficient natural light, the artificial light is switched off even if there is still someone
in the room.
Relay 2:
For movement detection independent of brightness e.g. ventilation or heating
control. The overshoot time is infinitely adjustable between 5 minutes and 2 hours.
Technical data
Mains voltage: AC 230 V ±10 %, 50 Hz
Relay 1 (sole use):Nominal capacity: max. 1000 W/VA,
5 A, cos
ϕ
= 1
5 A, cos
ϕ
= 0.6
Incandescent lamps: 1000 W
230 V halogen: 1000 W
LV halogen: 500 W with conventional transformer
Capacitive load: 5 A, 140 μF
Fluorescent lamps: 5 A, 140 μF;
1000 W, uncompensated;
1000 W, 140 μF parallel compensation;
2x500 W, twin-lamp circuit;
Electronic ballast: 5 A, Cmax
≤
140 μF
Minimum load: 10 mA,
≥
DC 24 V
Relay 2 (sole use):Nominal capacity: max. 1000 W, cos
ϕ
= 1
Relays 1+2 (combined use):Nominal capacity: max. 1000 VA, cos
ϕ
= 0.6 and max.
750 W, halogen 230 V
Fuse: T5H
Power consumption: < 1 W
Angle of detection: 360°
Range: a radius of max. 7m from the installation site (mounting height of 2.50m)
Number of levels: 6
Number of zones: 136 with 544 switching segments
Light sensor: infinitely adjustable between approx. 10 and 1000 lux. The light sensor
is not active in the test position.
EC guidelines: Low voltage guideline 73/23/EEC and EMC guideline 89/336/EEC
Accessories: Surface-mounted housing for Argus Presence, Part number
MTN550619.