Basic HTML Version
5/32
Technical
Section 9
Dimensions
Section 10
5
The TL+ high performance
impulse relay
Remote control
The TL+ allows high performance, in particular in terms of the number of switching
operations, equivalent performance with all lamp types, minimum noise, absence of
electromagnetic disturbances.
It combines the advantages of static switching and electromechanical technology:
compact size, minimum temperature rise.
Operation
The TL+ high performance impulse relay has a normally open contact and is
controlled by impulse type electrical orders.
One or more control points are possible.
b
On the front face, an orange indicator light comes on when the output contact is
b
closed
The TL+ impulse relay has a pushbutton on its front face allowing selection of the
operating mode. A green indicator light indicates the current mode:
ON/OFF control by room-mounted pushbutton (green light ON)
b
“ON” override (green light flashing)
b
“OFF” override (light OFF).
b
After a mains power outage, the TL+ returns to position 0, whatever its initial state.
TL+
Technical data
Voltage rating
230 V AC (±10 %), 50 Hz
Inrush power
11 VA
Holding power
1.1 VA
Impulse duration
50 ms (recommended value for automation system:
200 ms)
Control by illuminated
pushbutton
Max. consumption 5 mA
Maximum switching frequency 6 switching operations/minute
Noise level on energisation < 30 dBA
Characterisation on load types No derating
Electrical durability
5,000,000 cycles
Spacer
Compliance with standard EN 669-2-2
Approval
NF
Operating temperature
-5 °C to +55 °C
Connection by tunnel terminals
for flexible and rigid cables
Up to 2 x 1.5 mm
2
with end
2 x 2.5 mm
2
without end
1 x 4 mm
2
without end
Type
Width in
mod.
Coil voltage Uc
Part number
of 9 mm (V CA)
TL+ 16 A
1P+N
2+1
(1)
230
15032
(1)
Comes with a 9 mm spacer (cat. no.
27062
): to be used in case of mounting of the TL+ next to a
circuit-breaker, contactor, impulse relay, etc. to guarantee optimum use.
d
The same phase must be used for power and control connection.
1
2
3
N L
4
A1
A2
The TL+ high performance impulse relay allows remote
control of single-phase circuits.
It is intended for demanding applications