Basic HTML Version
7/90
Multiclip distribution block
● Distribution in a full row (48 steps) of modular switchgear. Generally supplied on
a busbar.
● The outlets are connected by the front, without screws on the spring terminals.
The contact pressure of the cable is independent from the operator.
● It adapts automatically to the cross-section of the conductor (min. cross-section
1 mm
2
).
● Each spring only accepts one flexible cable at a time.
● Degree of protection: IPxxB (protection against direct contacts).
● Installation: clipped onto the rear of a modular rail, for example Ref. 03004, or
screwed on mounting plates (see page
7/10
).
● Electrical characteristics:
– Rated insulation voltage: Ui = 750 V.
– Rated impulse withstand voltage: Uimp = 8 kV.
– Resistance to short-circuit currents: the interrupting capacity reinforced by filiation
is conserved in the case of automatic switch associations.
– 200 A Multiclip:
• 10 mm
2
cable outlet: Imax = 50 A.
• 2 different outlets with cables of 10 mm
2
: Imax = 63 A.
● Distribution:
– For 2-pole 200 A Multiclip (04012):
• 12 phase and neutral connection points.
– For 3-pole and 4-pole 200 A Multiclip (04013 and 04014):
• 12 connection points for each phase.
• 18 connection points for the neutral.
Supply: Multiclip distribution block, 10 mm
2
bared copper connections with a
length of 100 mm, 2 bags of 12 connections, terminal covers for the supply
poles (IPxxB), screws for the supply poles and fixing elements.
Model
Reference
200 A 2-pole
04012
200 A 3-pole
04013
200 A 4-pole
04014
Busbars and blocks
07_086_090_SFM053.indd 90
28/1