Basic HTML Version
6/71
enclosure
Introduction
Floor-standing enclosures designed mainly to accommodate busbars and
DIN-type three-pole LV fuse blocks, for distributing power from the public
grids.
The properties of the material and the manufacturing process are identical to
those of the Thalassa PLA range.
Technical characteristics
● Floor-standing enclosures, made from polyester reinforced with fibreglass,
moulded by hot compression, RAL 7032 grey colour.
● Direct fixing to the floor or on a plinth, with a height of 900 mm, partially
embedded.
● Resistance to external mechanical impacts: IK 10 (20 joules).
● Ventilated floor-standing enclosures with a degree of protection of IP 43,
according to IEC 60529 (IP 54 with sealing kit, see page
6/74
).
● Floor-standing enclosure with built-in canopy, not overhanging, allowing the
coupling of enclosures side-to-side or back-to-back.
● Easily removable inner hinges, allowing the door to be reversed and to open to
more than 180°.
● Doors equipped with impressions allowing the integration of inserts for M6
screws.
● Closing by handle with lever and 1242 E cylindrical safety lock. Other locks
optionally available (see page
6/74
).
● Fixing points at the rear of the enclosure with:
– M10 inserts: for installing, direct or on insulators, distribution bars for DIN-type
three-pole fuse-holder strips and for a neutral bar.
– M6 inserts: for installing a mounting plate.
● 2-door floor-standing enclosure with central upright:
– Fixed to the enclosure and removable: one lock on each door.
– Fixed to the left door: a single lock on the right door.
● M8 boss for installation on the lateral surfaces, inserts ref.
NSYTEX8
not supplied.
● M6 bosses in the roof for fixing the lighting or auxiliary equipment, inserts ref.
NSYTEX6
not supplied.
Selection guide for floor-standing enclosures and
accessories
External dimensions (mm)
Floor-standing
enclosures
Size
DIN
No. of
doors
No. of
locks
Insulating mounting
plates
Plinths
Number of
fittings*
Height
Width (B)
Depth
Page 6/71
Page 6/75
Page 6/72
850
465
320
NSYPLD8500
00
1
1
NSYAPLD85
NSYZD5300
3 + N
850
590
320
NSYPLD860
0
1
1
NSYAPLD86
NSYZD630
4 + N
850
785
320
NSYPLD881
1
1
1
NSYAPLD88
NSYZD831
6 + N
850
1115
320
NSYPLD8122
2
2
1
NSYAPLD812
NSYZD1232
9 + N
850
1115
320
NSYPLD8122C
2
2
2
NSYAPLD812
NSYZD1232
9 + N
*Number of fuse-holder blocks + N = nut for direct connection fitting (e.g. 3 + N).
Enclosure ref.
NSYPLD8122
with the
central upright fixed to the left door.
Enclosure ref.
NSYPLD8122C
with
central upright, 2 doors and 2 locks.
06_070_071_PLD001.indd 71
28/1