Basic HTML Version
6/17
General characteristics of the
Thalassa PLM wall-mounting
enclosures:
● Indoor or outdoor use.
● 1 size for the ABS/PC wall-mounting enclosure
(310
215
160 mm).
● 7 sizes of polyester wall-mounting enclosures.
● Monobloc body including the canopies (seal
protection), except for wall-mounting enclosure
ref.
NSYPLM3025
.
● Doors with polyurethane seal.
● 2 types of doors.
– Smooth.
– Transparent (for the ABS/PC enclosure) or glazed
(for the polyester enclosures).
● Reversible door opening direction by turning the
enclosure over.
● Degree of protection IP 66 according to standard IEC
60529.
● Impact resistance IK 10 for the plain doors
and surfaces and IK 08 for the glazed doors of
the polyester versions, according to standard
IEC 62262.
● Many accessories in common with the range of steel
wall-mounting enclosures, Spacial S3D or Spacial
CRN.
Properties of the material of the
polyester versions
The wall-mounting enclosures are made from
polyester reinforced with fibreglass, moulded by hot
compression, RAL 7032 colour.
This material:
● Is insulating: several kV per mm.
● Withstands cold and heat in the range of
–50 ºC...+150 ºC.
● Does not soften under intense heat (ball resistance
at +150 ºC).
● Is self-extinguishing (does not propagate fire):
HB40 classification and self-extinguishing in several
seconds during the glow-wire test at 960 ºC –30 sec.
● Does not contain halogens.
● Releases little smoke and no toxic smoke in the
event of combustion.
● Is light.
● Can be machined easily.
● Is corrosion-resistant: no rusting, and can withstand
many chemical agents.
● Can resist bad weather.
Characteristics of the production
process of the polyester version
The components of the enclosure (body and doors)
are moulded by hot compression: the parts have an
excellent finish on both sides and can include bosses
for accommodating inserts and accessories for
mounting or cable-management.
Certificate of conformity with
enclosure standard IEC 62208 for:
IP, IK, resistance to heat and fire, insulation 5000 V,
resistance to bad weather and corrosion and
resistance to internal loads (150 kg/m
2
) and loads on
the door (30 kg/m
2
).
UL certification and NEMA
classification 4x and 13 for
the polyester wall-mounting
enclosures
Full insulation to produce class II
units according to IEC 61439-1
Complies with the RoHS directive
06_016_017_PLM001.indd 17
28/1