Basic HTML Version
3/44
C-198
30
100
Floor
Ventilated front plinth
● The front and rear of the ventilated plinth is made up of 4 corners with 2 front
panels.
● Material: folded sheet steel, corner with a thickness of 2.5 mm.
● Finish: painted with epoxy-polyester resin, RAL 7022 grey.
● IP20.
● Resistance to external mechanical impacts: IK10.
● Maximum load: 1300 kg.
● Model height 100 mm.
Supply: height 100 mm: 4 corners, 2 ventilated panels (front and rear), 4
corner covers and fixing elements.
Nominal
dimensions (mm)
Reference
Width (B)
Height 100 mm
600
NSYSPFV6100
800
NSYSPFV8100
Ventilated side panels
● They are fixed to the corner of the plinth by fixing screws.
● Material: folded sheet steel.
● Finish: painted with epoxy-polyester resin, RAL 7022 grey.
● IP20.
● They can be combined with front plinths with a height of 200 mm. In this case, 2
sets of ventilated side panels are required.
Supply: height 100 mm: 2 ventilated side panels, 4 corner covers and fixing
elements.
Nominal
dimensions (mm)
Reference
Depth (C)
Height 100 mm
600
NSYSPV6100
800
NSYSPV8100
Panels with brush
● They allow the entry and fixing of cables inside the enclosure, through the plinth.
● Attachment to the corners of the plinth by screws.
● Material: folded sheet steel.
● Finish: painted with epoxy-polyester resin, RAL 7022 grey.
● Model heights: 100 mm.
Supply: 2 panels with brushes, 4 corner covers and fixing elements.
Nominal
dimensions (mm)
Reference
Depth (C)
600
NSYSPB6100
800
NSYSPB8100
03_042_045_SFM016.indd 44
28/1