Basic HTML Version
2/60
L
a
b
L
a
b
1- Suspension system without intermediate join attached:
The load (a + b + enclosure + installed equipment) must be less than the maximum
load.
Example:
Using a system with a diameter of 50 mm, without intermediate join, with an offset
of 1200 mm, the maximum supported load is 80 kg.
1- Without intermediate joint
2- Without intermediate joint
2- Suspension system with intermediate join attached:
The load (a + b + enclosure + installed equipment) must be less than the maximum
load.
Example:
Using a system with a diameter of 80 mm, without intermediate join, with an offset
of 1700 mm, the maximum supported load is 80 kg.
Our system of tubes and joints, fixed or rotating, enables all the solutions to respond
to the installation needs of the control enclosures for human-machine dialogue.
Every model is suitable for tubes with a square section of 50 mm for light loads, or
of 80 mm for heavy loads (see selection table on page
2/62
).
the load and the overhang
Without intermediate joint
Without intermediate joint
Examples
02_058_060_S3CM001.indd 60
12/