Basic HTML Version
2/42
for your modular distribution
application
Introduction
8 dimensions with a depth of 150 mm and glazed door. From H 400 W 300 to
H 1000 W 800 mm.
Enclosure with transparent door, 4-mm Securit
®
glass.
Plain door on demand, see page
2/43
.
Selection guide, page
2/36
.
Technical characteristics
● Structured finish, polyester powder, RAL 7035 grey colour.
● Protection degree: IP 66.
● Resistance to external mechanical impacts: IK 08.
Body
● Single-piece body, folded and welded. Front rail with double sheet thickness,
gutter-shaped.
● Wall mounting by means of fixing lugs (to be ordered separately, see page
2/24
).
● 4 M8 25-mm shouldered backstuds for installing chassis and step slides,
leaving a space of 10 mm behind them.
● Cable-gland plate (245 80) at the top and bottom of the enclosure,
guaranteeing the maximum access surface (page
2/27
).
Door
● Transparent door, 4-mm Securit
®
glass (plain door, see page
2/43
).
● Easily removable and reversible door, with 20-mm return with double thickness
granting excellent rigidity, opening to 120°, equipped with 2 or 3 invisible hinges.
Three locking points for heights of more than 600 mm.
● Wall-mounting enclosure supplied with 3-mm double-bar lock as standard.
● Perforated rails on the hinge side of the door, with drill holes with a diameter of
4.2 mm in steps of 25 mm.
● Polyurethane gasket.
● M6 16-mm earthing screw for equipotential connection between the door and
the body of the enclosure.
Dedicated accessories
● The Spacial S3DM enclosure for modular distribution can be equipped with:
– A modular chassis (
NSYDLM•••
) with cut-out front panels for 24 to 234 modules
according to the dimensions and references (see page
7/70
).
– A 6-mm
2
earth connection placed between the body and the door.
For enclosures with a depth of 150 mm, the chassis can be installed at the front or
on the backstuds at the rear. It is possible to adjust its depth using the adjustable
supports.
It can also be equipped with a plain mounting plate, see page
7/2
.
Top and bottom chequered
cable-gland plates.
*The DLM modular chassis consists of metal cut-out front panels which can clip
on with any screws. Rigid structure made from galvanised steel.The depth of the
chassis can be adjusted from 40 to 85 mm, between the rail and the front panel,
allowing the installation of all types of devices.The enclosure can be equipped with
accessories from the Spacial standard wall-mounting range.
S3DM enclosure.
S3DM enclosure equipped
with a DLM* modular chassis.
See also
the accessories
Blanking plate
page
7/73
Terminal blocks
page
7/98
02_042_043_S3D019.indd 42
21/